|15th August 2011, 11:33 PM||#1|
Join Date: Aug 2006
Location: Dallas, Texas USA
Wood Ding Repair
I have a F160 and have read about the various ways to repair a board, but here is the issue:
The ding (less than 1 cm on the deck) was apparently caused by a knot in the uphaul or?
The ding is no more than 3mm deep.
I tested the ding with soapy water & it bubbles when the board is hot with the plug closed.
Is there a way to seal this up without going through the "layer of fiberglass" routine or "a glob of ding stick".
A lump of clear epoxy possibly?
Cut out the damaged wood and fill with epoxy (1.5 cm diameter)? The area is so small, I hate to over do it.
Thanks for any advice.
Formula 160; iSonic 111; HiFly Move 105; Tiga 263; '85 Mistral Superlight.
Maui Sails TR 11.0; 9.2; 8.4; 7.6; 6.6; Maui Sails Switch 6.0; 5.2; Maui Sails Global 4.5; 4.0.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Wood deck repair, Git-rot?||skenn158||Ask Our Team||1||23rd June 2009 04:37 AM|
|Ding repair on 12'-6" wood||stoneaxe||Do it standing up! The Stand Up Paddling Forum||1||28th September 2007 08:41 AM|
|03 Starboard Carve 111 Ding Repair||spudz72||Free Forum||3||31st August 2007 07:23 PM|
|Woody ding repair||Jay||Windsurfing School||5||18th July 2007 07:44 AM|
|best way to repair wood ding||stefan37||Ask Our Team||4||10th March 2007 07:49 PM|