Go Back   Starboard Forums > Free Forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 2nd February 2013, 10:04 PM   #1
Nakaniko Unregistered
Guest
 
Posts: n/a
Default Tuttlebox nightmare

I've bought used at a cheap price a nice Starboard Formula Wood 158 from 2004 in very good conditions, very light and with only some small dings. I want to have the perfect partner fo my wonderful Serenity for light winds, right for the times that winds is slightly more. Therefore I can use also the seaweed fins bought for the Serenity.
But compared to the Serenity it has a imho strange and weird fin box. I mean I don't know why but the fin box is twice deep than necessary and than the head of my DT fins, and the inside head of the box it is really only few MILLIMETRES under the deck of the board!!!
Second thing, the hole were dramatically made wrong, I mean they ar not perpendicularly over the fin nuts but wrongly more set back toward the tail, so the head of fin bolts arrive at a about 5 degrees angle!
In this way for the first factor to find with the bolts the nuts in the fin head is really a matter of luck after a lot of attempts, so is not user friendly and hard to use for me especially in a rolling boat, because of the second, the mistake, screws when tighten horribly push only on the back side of the surface near of hole, with possible damages.
What is the reason of a so deep concave on the finbox head???
And If I fullfill with epoxy resin this useless space and make new and slightly more forward screw holes on the deck, would it be a solution or not?
  Reply With Quote
 

Bookmarks

Tags
None

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +7. The time now is 01:15 PM.