|19th November 2013, 02:20 PM||#1|
How to repair crack on iSonic 2011
Last week I bought a used 2011 iSonic. I checked the board for damages and wether it has got soft or not. All looked ok, but then 2 days later I noticed a crack! I feel really stupid now, because it is quite obvious:
I stood on the left and right side of the crack and it seems to me, that it is just the top layer of the sandwich, which got apart. The weight with footstraps is around 6.6-6.7kg, so I assume there is no water inside.
I read that the 2011 models use UD Carbon 80 and 60g glass. How would you fix that? Do I have to take off/grind off about 5 cm on each side of the crack and then laminate 1 or 2 layers of 60g glass fiber (10cm wide) on top of it? I read that it should not be stronger after the fix to avoid hard spots.
So basically I just want to ask how you would fix that.
Thanks a lot and greetings,
|Thread||Thread Starter||Forum||Replies||Last Post|
|Crack Isonic 127 at first day!||Pelegrin||Ask Our Team||13||28th September 2011 05:06 AM|
|small crack on wood||insandout||Ask Our Team||6||14th October 2010 01:59 AM|
|How to repair a screw anchor on iSonic...||Expander||Free Forum||3||13th October 2008 09:43 PM|
|Crack on my board||Igor_Uakauaka||Free Forum||2||7th September 2008 10:47 PM|