Go Back   Starboard Forums > Ask Our Team

Reply
 
Thread Tools Display Modes
Old 10th May 2011, 02:08 AM   #1
TSAF
New Member
 
Join Date: Oct 2009
Posts: 19
Default Isonic 101 2008 sticking

hi i just bought an isonic 101 of 2008.
I am 72 kg and used it with 6.4 sail and 38 tectoncs talon.
I had my mastfoot 1 cm behind center and footstraps in the middle.
the board seems to stick in water, it planes later than other boards i tested the same day.

Is that a problem with that years design..?
TSAF is offline   Reply With Quote
Old 10th May 2011, 05:00 AM   #2
nonopr
Member
 
Join Date: Aug 2008
Location: San Juan, Puerto Rico
Posts: 573
Default

The fin is not helping this board either. It was known to everyone that 2008 and before had some issues with the nose sticking. I worked with a few fin manufacturer to help me personally fix that problem and I found that the board needs to ride with footstraps in the middle front and all the way in the back on the back.
Also the fin that work for me best was Vector fins the Canefire 38 the angle of that fin was optimum to help promote a high riding nose. Also Use a D2 39cm from F4 Fins and we solve the problem also with that fin.
nonopr is offline   Reply With Quote
Old 10th May 2011, 05:09 AM   #3
Remi
STARBOARD DEVELOPMENT
 
Join Date: Aug 2006
Location: Thailand
Posts: 2,440
Default

Hi TSAF,

Try to put all your foot-straps in the back and put your boom eyes height with long harness line. 38 for 6.4 look to big also, better to try 36.

Hope this help

All the best
__________________
Remi

Can answer if you have any questions on this following boards :

Carve 111, 121, 131, 141, 151 & 161
Futura 93, 101, 111, 121, 131 & 141.
iSonic 80, 87, 90, 97, 107, 110, 117 & 130
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

UltraSonic 147
Formula Experience One Design
Phantom Race 377 & 377 L / 320
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Phantom 295 L :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Formula 167 :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Racing Serinity Cat Concept
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Remi is offline   Reply With Quote
Old 12th May 2011, 12:17 AM   #4
TSAF
New Member
 
Join Date: Oct 2009
Posts: 19
Default

The board i want to use it for figure 8 slalom (reaching, upwind).
about the mast track, any suggestion...?
Will any Deb sl2 help the situation...?
The sails i want to use it, are 6.4 and 7.4. with wind 15 knots and upwards.
TSAF is offline   Reply With Quote
Old 12th May 2011, 11:16 AM   #5
Remi
STARBOARD DEVELOPMENT
 
Join Date: Aug 2006
Location: Thailand
Posts: 2,440
Default

Hi TSAF,

Yes the SL2 will help on this due is stiff head compare to the Tectonics who is more design for down wind slalom. SL2 is more around Slalom fins with good performances up wind.

All the best
__________________
Remi

Can answer if you have any questions on this following boards :

Carve 111, 121, 131, 141, 151 & 161
Futura 93, 101, 111, 121, 131 & 141.
iSonic 80, 87, 90, 97, 107, 110, 117 & 130
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

UltraSonic 147
Formula Experience One Design
Phantom Race 377 & 377 L / 320
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Phantom 295 L :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Formula 167 :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Racing Serinity Cat Concept
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Remi is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Which fin for iSonic 122 2008 k0zak Free Forum 2 4th July 2009 05:13 PM
Q for Ian : 2008 Isonic 101 superidis Ask Our Team 8 14th January 2008 07:40 PM
2008 iSonic 101 ??? Can Inelli Ask Our Team 0 6th December 2007 02:43 AM
iSonic 101 2008 Help??? Can Inelli Free Forum 1 25th October 2007 07:07 PM
iSonic 150 2008 Unregistered Free Forum 0 14th September 2007 10:44 PM


All times are GMT +7. The time now is 02:00 AM.