iSonic 117 carbon; what type of fin?

jary · 7th May 2011, 09:26 PM

Hello team!
I have ordered a new iSonic 117 carbon.
I have tryed to get in contact with Deboichet for bying a Deboichet R16 44 fin, but without any luck..

But the lokal store has Drake-fins (only tuttle-models, no deep tuttle models).
Is it a good substitute to bye a Drake R13 Race NR 44 compare to the Deboichet R16 44? Or is the Deboichet R16 44 a much better fin than the Drake R13 Race NR 44 fin?

Does the fin a choose have to be a deep tuttle model (recomended by Starboard) or is it ok to use a tuttle model?

Regards
Jacob

Remi · 10th May 2011, 05:40 AM

Hi Jacob,

Deboichet is Custom fins and price are definitely not the same because they use better material, so they are better than Drake.

Did you send all this information to Deboichet :

Order, Address and Credit Card Number to register your Order?

You can use without problems simple Tuttle in deep Tuttle box.

All the best

jary · 10th May 2011, 08:44 PM

Hi Remi
Thank you for your answer!

Regards
Jacob

7th May 2011, 09:26 PM	#1
jary Member Join Date: Jan 2010 Posts: 22	iSonic 117 carbon; what type of fin? Hello team! I have ordered a new iSonic 117 carbon. I have tryed to get in contact with Deboichet for bying a Deboichet R16 44 fin, but without any luck.. But the lokal store has Drake-fins (only tuttle-models, no deep tuttle models). Is it a good substitute to bye a Drake R13 Race NR 44 compare to the Deboichet R16 44? Or is the Deboichet R16 44 a much better fin than the Drake R13 Race NR 44 fin? Does the fin a choose have to be a deep tuttle model (recomended by Starboard) or is it ok to use a tuttle model? Regards Jacob

10th May 2011, 05:40 AM	#2
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,334	Hi Jacob, Deboichet is Custom fins and price are definitely not the same because they use better material, so they are better than Drake. Did you send all this information to Deboichet : Order, Address and Credit Card Number to register your Order? You can use without problems simple Tuttle in deep Tuttle box. All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Delamination on the new 121 iSonic Wood Carbon.	nonopr	Free Forum	13	29th May 2010 04:50 PM
iSonic wood carbon 121 fin	roby007	Ask Our Team	11	25th April 2010 09:17 PM
iSonic 86 wood/carbon	sebnoumea	French Forum	15	30th January 2010 01:33 AM
Isonic _wood carbon	Steve711	Ask Our Team	3	16th June 2009 02:50 PM
Carbon art slalom vs isonic	Unregistered	Free Forum	5	28th September 2007 02:11 PM

10th May 2011, 08:44 PM	#3
jary Member Join Date: Jan 2010 Posts: 22	Hi Remi Thank you for your answer! Regards Jacob