How to paint Isonic Carbon 127/2011?

Pelegrin · 13th October 2011, 10:32 PM

The grey colour has fallen off at an area of about 30 x 1 cm under my Isonic Carbon 127 and there seam to be indicators of small cracks in the colour surface that could lead to more losts of paint. The black carbon surface under the the paint is shown. The carbon surface is ruff and will make resistance in water.

(This has nothing to do with the crack damage I have mentioned earlier. This damage is in the middle under the board.)

QUESTION - How to paint and how to find paint?

nonopr · 14th October 2011, 02:34 AM

Here is a tip:
Sand the entire bottom with 400 grid wetsandpaper.
Then Use 600 grid wetsandpaper to finish it.
Use Car Paint if they sell DUMPLICOLOR brand use it buy the grey base paint and just spay it lightly on the bottom and that is it.
Use again the 600 grid wet sand paper and you have a new board.

Pelegrin · 14th October 2011, 11:48 PM

Thanks monopr! I do not know if You are in the Starboard Team or not, but: If not it seams to be a good advice that I will follow unless somenone from the team says that I will handle the situation in another way. As far as this I am not so impressed of the quality of the board, but sailing it is really nice and easy.

Remi · 15th October 2011, 02:22 PM

Hi Pelegrin,

You will find here the code of this paint, thanks

http://www.star-board.com/2012/produ....php?id=colors

All the best

13th October 2011, 10:32 PM	#1
Pelegrin Member Join Date: Sep 2011 Posts: 41	How to paint Isonic Carbon 127/2011? The grey colour has fallen off at an area of about 30 x 1 cm under my Isonic Carbon 127 and there seam to be indicators of small cracks in the colour surface that could lead to more losts of paint. The black carbon surface under the the paint is shown. The carbon surface is ruff and will make resistance in water. (This has nothing to do with the crack damage I have mentioned earlier. This damage is in the middle under the board.) QUESTION - How to paint and how to find paint?

15th October 2011, 02:22 PM	#4
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,342	Hi Pelegrin, You will find here the code of this paint, thanks http://www.star-board.com/2012/produ....php?id=colors All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fastest fin for the iSonic 117 carbon	jary	Ask Our Team	5	20th September 2011 02:21 AM
Test Isonic 117 Wide Carbon 2011	Fab70	French Forum	18	31st July 2011 04:32 PM
Isonics 2011 C & WC - No paint finish to save weight	BelSkorpio	Free Forum	4	2nd September 2010 06:40 AM
Test Quad IQ 82 Wood Carbon 2011	Fab70	French Forum	0	30th August 2010 12:57 AM
Oh no scratched the Isonic - paint code??	Waiting4wind	Ask Our Team	2	18th January 2009 10:45 PM

14th October 2011, 02:34 AM	#2
nonopr Member Join Date: Aug 2008 Location: San Juan, Puerto Rico Posts: 573	Here is a tip: Sand the entire bottom with 400 grid wetsandpaper. Then Use 600 grid wetsandpaper to finish it. Use Car Paint if they sell DUMPLICOLOR brand use it buy the grey base paint and just spay it lightly on the bottom and that is it. Use again the 600 grid wet sand paper and you have a new board.

14th October 2011, 11:48 PM	#3
Pelegrin Member Join Date: Sep 2011 Posts: 41	Thanks monopr! I do not know if You are in the Starboard Team or not, but: If not it seams to be a good advice that I will follow unless somenone from the team says that I will handle the situation in another way. As far as this I am not so impressed of the quality of the board, but sailing it is really nice and easy.