isonic 117wide, with Reflex II 9.2

ppeixeiro · 8th December 2011, 07:06 PM

Hi, pro team.
I´m 73kg, 1,76m high.
Instead of having the isonic 127, I choosed, for my bigger board, the 117wide. With 127, I´m flying early, with consequent loose of control. With the 117wide, I go faster, with more control' even using the 7.8.
Now the question is: Do you think this board can go fast and work correctly with reflex 9.2, if i put a 49cm fin, the select S11? would you advise me another combination?
Tks,

nonopr · 8th December 2011, 09:59 PM

Yes, It will work very good.
I have one and I mostly use it with 7.6, 8.4 and 9.2.
The 8.4 and 9.2 have been most of the time with great performance.

pfaffi · 9th December 2011, 01:32 AM

maximum fin size S1 46cm with 9.2!!
Steve A. best combo/PWA results: 117W and 9.2
pfaffi

Chris Pressler · 21st December 2011, 05:42 AM

Hi Ppeixero,
yeah, Pfaffi and Nonpr are totally right. And you are a light sailor. Probably you will not need a 9,2 to go in light conditions. Would bet you are fine with a 8,6 as the largest. Fins are fine from 44 to 48 cm.

Cheers,
Chris

konstas · 23rd December 2011, 04:12 PM

a question the Finn S1 that I can find them
thanks

Chris Pressler · 23rd December 2011, 06:54 PM

Hi Konstas,
check them out here: http://www.pfaffi.at/pfaffi_fins/S1_Slalom.html

Cheers,
Chris

konstas · 24th December 2011, 03:20 AM

thanks Chris

8th December 2011, 07:06 PM	#1
ppeixeiro New Member Join Date: May 2008 Location: Lisbon, Portugal Posts: 5	isonic 117wide, with Reflex II 9.2 Hi, pro team. I´m 73kg, 1,76m high. Instead of having the isonic 127, I choosed, for my bigger board, the 117wide. With 127, I´m flying early, with consequent loose of control. With the 117wide, I go faster, with more control' even using the 7.8. Now the question is: Do you think this board can go fast and work correctly with reflex 9.2, if i put a 49cm fin, the select S11? would you advise me another combination? Tks,

21st December 2011, 05:42 AM	#4
Chris Pressler Member Join Date: Sep 2006 Location: AUSTRIA, Lake Neusiedler Posts: 297	Hi Ppeixero, yeah, Pfaffi and Nonpr are totally right. And you are a light sailor. Probably you will not need a 9,2 to go in light conditions. Would bet you are fine with a 8,6 as the largest. Fins are fine from 44 to 48 cm. Cheers, Chris __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

23rd December 2011, 06:54 PM	#6
Chris Pressler Member Join Date: Sep 2006 Location: AUSTRIA, Lake Neusiedler Posts: 297	Hi Konstas, check them out here: http://www.pfaffi.at/pfaffi_fins/S1_Slalom.html Cheers, Chris __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
REFLEX triming	costazzz	Ask Our Team	7	21st January 2012 08:15 AM
reflex 3	donovan:))))	Ask Our Team	9	10th October 2011 09:37 PM
Isonic 117wide or 127	cjt	Ask Our Team	2	23rd September 2011 07:50 PM
F131 vs iS 117wide	fraser241	Free Forum	4	3rd May 2011 02:38 PM
Question for Remi: isonic 117 or 117wide?	Marko	Ask Our Team	3	7th September 2010 09:44 PM

8th December 2011, 09:59 PM	#2
nonopr Member Join Date: Aug 2008 Location: San Juan, Puerto Rico Posts: 572	Yes, It will work very good. I have one and I mostly use it with 7.6, 8.4 and 9.2. The 8.4 and 9.2 have been most of the time with great performance.

9th December 2011, 01:32 AM	#3
pfaffi Member Join Date: Jan 1970 Location: Austria - Lake Neusiedler, closed Vienna Posts: 136	maximum fin size S1 46cm with 9.2!! Steve A. best combo/PWA results: 117W and 9.2 pfaffi

23rd December 2011, 04:12 PM	#5
konstas Member Join Date: Dec 2006 Posts: 57	a question the Finn S1 that I can find them thanks

24th December 2011, 03:20 AM	#7
konstas Member Join Date: Dec 2006 Posts: 57	thanks Chris