isonic 111 ad fins

zalcort · 28th April 2012, 06:38 PM

Hi, I have a Isonic 111 2010 wood carbon, my sails are Neilpryde rs racing 7.8 and 7.2
My weight is 75 kg and I'm 180 cm tall

I have some problems to choose the right fin for my board, my doubts are among those fins listed:
Deboichet Sl2
Deboichet Sl4
Tectonics Talon
Vector Canefire

Can someone help me to decide the right fin and the right size?
Thanks

nonopr · 30th April 2012, 11:18 AM

Vector canefire in 42cm will do with the 7.8 and 40 cm with 7.2

zalcort · 1st May 2012, 02:19 PM

Thanks for your reply...you mean vector carbon or g10 fins?
What about the Tectonics Talon fins, do you know the difference with vector fin?

Ken · 1st May 2012, 02:41 PM

zalcort,

I know the Talon is out there, but it's not on their website? I don't understand this.

http://tectonicsmaui.com/

However, I have been using a Tectonics Tomcat 42 on my iS 111 for a few years and love the fin. I use it with my 8.4, 7.6 and 6.6 race sails. I weigh 77kg and free sail the board. The 42 is a little small for the 8.4 and a little large for the 6.6, but overall, a good one fin solution.

Gyurmo · 3rd May 2012, 08:20 PM

hi zalcort,

the sl4 is much better than sl2 for this board. sl2 spin out often. with 44 you can get early planning and nice lift on flat water with your 7,8. 42 better for your weight on choppy water. for the 7,2 40 cm is nice but in overpower condition i would prefer 38 for you in the iSonic 111. i dont know the tech and vectors.

i hope its help,
gyurmo

28th April 2012, 06:38 PM	#1
zalcort New Member Join Date: Sep 2011 Posts: 5	isonic 111 ad fins Hi, I have a Isonic 111 2010 wood carbon, my sails are Neilpryde rs racing 7.8 and 7.2 My weight is 75 kg and I'm 180 cm tall I have some problems to choose the right fin for my board, my doubts are among those fins listed: Deboichet Sl2 Deboichet Sl4 Tectonics Talon Vector Canefire Can someone help me to decide the right fin and the right size? Thanks

1st May 2012, 02:41 PM	#4
Ken Member Join Date: Aug 2006 Location: Dallas, Texas USA Posts: 797	zalcort, I know the Talon is out there, but it's not on their website? I don't understand this. http://tectonicsmaui.com/ However, I have been using a Tectonics Tomcat 42 on my iS 111 for a few years and love the fin. I use it with my 8.4, 7.6 and 6.6 race sails. I weigh 77kg and free sail the board. The 42 is a little small for the 8.4 and a little large for the 6.6, but overall, a good one fin solution. __________________ Toys: Formula 160; iSonic 111; HiFly Move 105; Tiga 263; '85 Mistral Superlight. Maui Sails TR 11.0; 9.2; 8.4; 7.6; 6.6; Maui Sails Switch 6.0; 5.2; Maui Sails Global 4.5; 4.0.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
iSonic 111 and Canefire fins from Vector Fins	nonopr	Ask Our Team	7	20th September 2011 10:25 PM
iSonic 150 fins	marekk	Ask Our Team	0	6th January 2011 09:58 PM
which fins for isonic 122, 101, 86	prigipas	Ask Our Team	2	27th May 2008 10:07 AM
fins for isonic 50	carl macdonald	Free Forum	1	9th April 2008 04:08 AM
fins for the 101 isonic	ben tribu	Kevin`s Corner	1	29th July 2007 10:33 PM

30th April 2012, 11:18 AM	#2
nonopr Member Join Date: Aug 2008 Location: San Juan, Puerto Rico Posts: 572	Vector canefire in 42cm will do with the 7.8 and 40 cm with 7.2

1st May 2012, 02:19 PM	#3
zalcort New Member Join Date: Sep 2011 Posts: 5	Thanks for your reply...you mean vector carbon or g10 fins? What about the Tectonics Talon fins, do you know the difference with vector fin?

3rd May 2012, 08:20 PM	#5
Gyurmo Dream Team Member Join Date: Feb 2012 Posts: 64	hi zalcort, the sl4 is much better than sl2 for this board. sl2 spin out often. with 44 you can get early planning and nice lift on flat water with your 7,8. 42 better for your weight on choppy water. for the 7,2 40 cm is nice but in overpower condition i would prefer 38 for you in the iSonic 111. i dont know the tech and vectors. i hope its help, gyurmo