1st June 2012, 03:59 AM
|
#1 |
|
Guest
Posts: n/a
|
Reflex 3- 5.6 on RDM?
Has anyone used a Reflex 3 sail in the smaller sizes on an RDM mast? I rigged the 5.6 on an RDM mast(with original cams) and the sail looks very nice, couple of spacers on each cam cleaned up the luff sleeve nicely.
Statically comapring it to the SDM mast when rigged the sail looks the same in profile, the leech releases abit easier on the RDM mast when being downhauled but thats about the only difference I can see visually, on the water it maybe a different case between the 2 masts. |
|
 |
| Bookmarks |
| Tags |
| None |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Reflex III 7.0 first roll out | pfaffi | Ask Our Team | 2 | 5th February 2012 08:07 AM |
| Reflex III 12.0 first rigging | pfaffi | Ask Our Team | 7 | 26th January 2012 09:23 AM |
| REFLEX triming | costazzz | Ask Our Team | 7 | 21st January 2012 08:15 AM |
| Reflex III first photos 10.7 and 7.0 | pfaffi | Ask Our Team | 1 | 19th January 2012 05:52 PM |
| reflex 3 | donovan:)))) | Ask Our Team | 9 | 10th October 2011 09:37 PM |
Linear Mode
