|10th May 2014, 09:33 PM||#1|
Join Date: Jul 2009
Why the difference in recommended fin & sail size?
I received my Is130 today an noticed that the recommended fin and sail size as noted on the board is different from that shown on the Isonic spec page on this Website (under products). The spec page notes the largest fin as a 52 cm., while the sticker on the board shows a maximum fin size of 50 cm. Same for sail sizes. The spec page shows a maximum sail size of 10.0 meter., while the sticker on the board recommends only a 9.6 meter. Why the difference and which one is more accurate? I purchased a 10.0 meter sail when I bought the board -- here's hoping it's comfortable on the 130.
Last edited by Deja Vu; 10th May 2014 at 09:35 PM.
|11th May 2014, 10:16 AM||#2|
Join Date: Aug 2006
I guess the sticker on the board is wrong and belongs to an iSonic 127/137...? Ask your dealer to send you the correct sticker.
The specs shown on the website are spot on. The iSonic 130 has been designed to match perfectly with a 10.0 m2 sail to get maximal efficiency in light wind slalom for Bjorn, don't worry.
Last edited by Jean-Marc; 11th May 2014 at 10:21 AM.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Using smaller sail than minimum recommended sail with fututra 141||Unregistered||Free Forum||4||8th September 2012 09:11 PM|
|Overshooting recommended sail range?||FuturaRider||Free Forum||10||6th May 2012 08:22 PM|
|Recommended sail range Kode 94 for 90kg+||Unregistered||Free Forum||2||25th July 2011 03:58 AM|
|Rio M fin size difference||bratg0||Windsurfing School||5||12th September 2009 03:02 AM|
|Reason for recommended sail ranges?||Guest||Free Forum||1||15th June 2007 10:57 PM|