Go Back   Starboard Forums > Free Forum

Reply
 
Thread Tools Display Modes
Old 21st April 2007, 06:21 PM   #1
Guest
Member
 
Join Date: Dec 2006
Posts: 1,321
Default isonic 111 trimming-Remi, Jesper, Ian

Hi,

Lot of info about the isonics on the forum what really help to choose the right board! I did it and I get the isonic111 just now. Please help me out to find the right trimming for the board, based on your experience, complete all the relevant info here in one place.

I'm 184cm 85kg. Sails are 9,0 7,7 6,6 race sails.

1. Footstrap positions? Front or back, which holes is the right from the opportunities?
2. Where is the right mastfoot position? (you talk about the whole mast track or just the active area, without the back appr. 2cm?)
3. Which Deboichet SL2 fin work the best for 9,0?
4. Which Deboichet SL2 fin work the best for 7,7?
5. Which Deboichet SL2 fin work the best for 6,6?

To save your time you can write your answers just after the relevant number…

Thanks a lot for your help,
Willy
Guest is offline   Reply With Quote
Old 26th April 2007, 07:17 PM   #2
Guest
Member
 
Join Date: Dec 2006
Posts: 1,321
Default RE: isonic 111 trimming-Remi, Jesper, Ian

i'm back again...
willy
Guest is offline   Reply With Quote
Old 27th April 2007, 05:05 AM   #3
Ian Fox
STARBOARD
 
Join Date: Aug 2006
Posts: 532
Default RE: isonic 111 trimming-Remi, Jesper, Ian

Hi Willy,

Please excuse the delay/s- April was a bad and busy month for us..

Strap positions : Full back for flatter water, lighter wind speed; otherwise with open water choppier conditions, the middle position on FRONT and REAR straps allows a more balanced, calming stance over the iS which allows the rider to push-on when otherwise might be backing off..

Mast track; well, we generally just consider the "active area";

Typically :

9.0m : 50-70% FWD
7.7m : 50%
6.6m : 50% (maybe back a bit [30-40%] on flat water speed)

SL2 Fins

Typically (80-90kg):

9.0 Lightwind 42-44cm
9.0 Midwind 40cm
9.0 Overpowered 38cm

7.7 Lightwind 38-40cm
7.7 Midwind 36cm
7.7 Overpowered 34cm

6.6 Lightwind 36-38cm
6.6 Midwind 34cm
6.6 Overpowered 32cm

(No big suprises there, and relatively easy to build a nice 3 fin iS111 quiver to cover all ranges)

Please let us know if you have any further questions.

Cheers ~ Ian
Ian Fox is offline   Reply With Quote
Old 27th April 2007, 02:59 PM   #4
Guest
Member
 
Join Date: Dec 2006
Posts: 1,321
Default RE: isonic 111 trimming-Remi, Jesper, Ian

hey my man,

thanks a lot IAN!!! your answers are really helpfull, clear and professional.

thank you very much,
willy
Guest is offline   Reply With Quote
Old 28th April 2007, 04:57 PM   #5
Guest
Member
 
Join Date: Dec 2006
Posts: 1,321
Default RE: isonic 111 trimming-Remi, Jesper, Ian

Hi Ian,
it would be great if you tell us when a 80 kg guy should switch from 9,0 to 7,8 and then to 6,8 .
I know it depends from many factors that are very difficult to right evaluate but it can help to have an idea....
thank you
Guest is offline   Reply With Quote
Reply

Bookmarks

Tags
None

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +7. The time now is 03:04 PM.