Code red r2 -11.6

Guest · 23rd June 2007, 06:13 PM

Hi,

My question is if she will working good with my Powerex Z-speed 550 IMCS 39 or will be necessary to get Severne mast.
Also let me know if anybody else have a special detail to tune up the sail with this mast .
Regards.

pfaffi · 24th June 2007, 03:37 PM

Try it and watch the shape of the sail! Depends how your mast is bending.
If to soft in the boom section: you must downhole it until you have enough loose leech and results in a to flat sail with no press on the cambers.
If the mast fits: you should have enough loose leech (loose in the first section between first and second batten 5cm-10cm distance to the mast pocket) and enough press on the cams.
Maybe you must try it with the top extension.
Have fun!

23rd June 2007, 06:13 PM	#1
Guest Member Join Date: Dec 2006 Posts: 1,321	Code red r2 -11.6 Hi, My question is if she will working good with my Powerex Z-speed 550 IMCS 39 or will be necessary to get Severne mast. Also let me know if anybody else have a special detail to tune up the sail with this mast . Regards.

24th June 2007, 03:37 PM	#2
pfaffi Member Join Date: Jan 1970 Location: Austria - Lake Neusiedler, closed Vienna Posts: 136	RE: Code red r2 -11.6 Try it and watch the shape of the sail! Depends how your mast is bending. If to soft in the boom section: you must downhole it until you have enough loose leech and results in a to flat sail with no press on the cambers. If the mast fits: you should have enough loose leech (loose in the first section between first and second batten 5cm-10cm distance to the mast pocket) and enough press on the cams. Maybe you must try it with the top extension. Have fun!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode