Old 6th February 2008, 10:40 PM   #1
Roly Gardner
Member
 
Join Date: Dec 2006
Posts: 74
Default Fin Size/Sail Size

Hi Roger,

I know you have spent some time explaining this to me before, but I wonder if you could humour me once more?

I now have a quiver as follows;5.0m;5.7m;6.5m;7.8m.

My board is a 2003 Carve 145 which came with a standard straight profiled 52cm fin. I bought a 40 cm, slightly curved profile fin as I found that, when beach starting the longer fin was stopping me getting away from the beach. Not necessarily the reason to alter the fin I know but I was advised by one of the local guys to go to a smaller fin.

I managed to get the right size bolts and sand the new fin to fit as per your instructions, thank you. My question is how big a sail can I use with the smaller fin please?

Cheers

Roly
Roly Gardner is offline   Reply With Quote
Old 7th February 2008, 04:55 AM   #2
Roger
Dream Team - School Guru
 
Join Date: Aug 2006
Posts: 2,092
Default

Hi again Roly,
OK, some things you need to ponder when selecting a fin.
First, fin size is not just about sail size.
Sailor weight and size can figure into the overall geometry.
Tail width of the board is another factor.
I would think that you could fairly easily use a 40 cm fin with
your 6.5 m2 rig.
For the 7.8 m2 rig the stock 52 might be better, and I'm pretty sure you
will find that you have to develop some pretty blazing speed before the
little 40 cm "feels" as solid as the 52 cm vertical fin.
Also, how "powered up" you are is going to make some difference also.
If you are really "powered up to overpowered, you can use a smaller fin.
If you are only reaching back and forth across the true wind, a smaller fin
can work.
If you have to get upwind alot (or stay upwind) then you'll want a larger
fin.
So, lots of factors here, and you really need to go out and try all your fins with
all your different size rigs.
If you are "easy" with your back foot on the 40 cm, it could work with your 7.8 m
rig.
Conversely if you are a "fin pusher" or a big heavy guy (these two seem to go hand in hand) then you may find that the stock 52 cm fin works better with your 3 larger rigs and you only need the 40 cm for the 5.0 in nukin' conditions.
Hope this helps,

Last edited by Roger; 7th February 2008 at 09:43 PM.
Roger is offline   Reply With Quote
Old 7th February 2008, 04:27 PM   #3
Roly Gardner
Member
 
Join Date: Dec 2006
Posts: 74
Default

Roger,

Thanks for the guidance. I will get out there and experiment a bit.

As always, thank you for your advice.

Roly
Roly Gardner is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +7. The time now is 05:25 PM.