5th February 2008, 02:31 PM
|
#1 |
|
New Member
Join Date: Jan 2008
Posts: 2
|
iSonic 96 cut outs?
Hi, I’ve just recently received a new iSonic 96w59. On the pictures of the 96w59 on the website the board has cut outs in the tail but my board does not have any cut outs. Is the 96w59 supposed to have cut outs or not?
//JIMMY |
|
|
|
5th February 2008, 05:19 PM
|
#2 |
|
STARBOARD
Join Date: Aug 2006
Posts: 532
|
Hi Jimmy,
Your board is correct and the website graphic needs correcting. The 2008 iS96w59 is a non cutout board. We can assure you we have tried extensive versions of this critical racing size board with many combinations of tail cuts, cut outs and side cuts etc etc - but only the best proto made it thru to production and out to the customers.. Please accept our apologies if you had been misinformed by the graphic. Hopefully you will be very satisfied with the board as supplied. Cheers ~ Ian |
|
|
|
|
5th February 2008, 05:41 PM
|
#3 |
|
New Member
Join Date: Jan 2008
Posts: 2
|
Ok, Then I'm happy! I'm sure I'll be very satisfied with the board. And thanks for the fast reply.
//JIMMY |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
