Old 17th October 2008, 01:21 AM   #1
Malloy
New Member
 
Join Date: Oct 2008
Posts: 8
Default Isonic 111 - Fins

Oh dear, I'm sure this question comes up all the time!

About two months ago I finally broke down to the pressure of my windsurfing buddies and went out and got a 2007 Isonic 111. Looking back I should have done this a long time ago but hey, I dont like getting bossed around

The board is fantastic and the two fins that came with the board (36 and 42cm) have proved servicable so far. Having gotten used to the board I am now in the process of figuring out ways to get the board go faster (yes, I am one of those people who loves going fast, or at least faster than my buddies).
My 'weapons of choice' at the moment (not my choice really, more a question of finances) are a NP V8, 8.0, and a Ezzy Infinity 6.5. I realize that these sails might not be the absolute pinnacle of speed-sailing technology, but at the moment those two sails will suffice.

My question is this: What fins (preferably two) would increase my speed on the 111 Isonic (2007) with the two sails mentioned? What brands... models and sizes would help me go faster. Ofcourse control and upwind-sailability is of interest as well, but not the primary goal here; beating my buddies on the other hand, is vital

So, has anyone any experience with the board/sail-fin combination that I have here, then any help would be much appreciated!

Oh, almost forgot it: I'm around 85kgs, 1.80m tall and sail in flat/slightly chopped water in anything from 15-30 knots.

Thank you very much in advance!
Malloy is offline   Reply With Quote
Old 17th October 2008, 02:58 AM   #2
Chris Pressler
Member
 
Join Date: Sep 2006
Location: AUSTRIA, Lake Neusiedler
Posts: 303
Default

Hi Malloy,
I tried a lot of different fins. First MFC, which are fine. Sometimes a Deboichet, which feels super powerful and should be great. Most of the top ranked PWA SLlaom 42 sailors use them.
Nowadays I use Vector fins, the CF (canfire) model. I would recommend 42 or 40.
Enjoy sailing,
Chris
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Chris Pressler is offline   Reply With Quote
Old 17th October 2008, 03:07 AM   #3
nonopr
Member
 
Join Date: Aug 2008
Location: San Juan, Puerto Rico
Posts: 573
Default

Yeah, I use also Vector Fins Model Canefire 38cm for 6.3m, 40cm for 6.6m, 42 for 7.6.
So far that is my biggest sail in that board iSonic 111 2008.
nonopr is offline   Reply With Quote
Old 17th October 2008, 05:01 AM   #4
Malloy
New Member
 
Join Date: Oct 2008
Posts: 8
Default

Thank you so much for the swift replies.

I've emailed Vector Fins for size recommendation, price and availability.

If anyone else have any experience and information they would like to share in regards to fins for my Isonic 111, please feel free to post away.

Again, thank you so much for your advice, much appreciated!
Malloy is offline   Reply With Quote
Old 17th October 2008, 06:47 AM   #5
nonopr
Member
 
Join Date: Aug 2008
Location: San Juan, Puerto Rico
Posts: 573
Default

Vector for the price has no comparison.. You will be happy with how they work. Jasper Orth is their team rider and rides for startboard he was the one who recommended Vector.
$195 for sizes 38cm and under and $205 for bigger sizes than 40cm. Hope you get to buy one they are great, Also your board will stop spinning out like with the original fins the boards comes with.
nonopr is offline   Reply With Quote
Old 18th October 2008, 03:07 PM   #6
Chris Pressler
Member
 
Join Date: Sep 2006
Location: AUSTRIA, Lake Neusiedler
Posts: 303
Default

Hi nonopro and malloy,
that spinning out topic is important and I really felt the same. Very seldom a spinning out. Amazing. I am also surprised how well bigger sized (38+) G10 fins work.

Chris
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Chris Pressler is offline   Reply With Quote
Old 18th October 2008, 07:06 PM   #7
nonopr
Member
 
Join Date: Aug 2008
Location: San Juan, Puerto Rico
Posts: 573
Default

VEctor fin should include me on the team. I have given them so much good marketing.
nonopr is offline   Reply With Quote
Old 26th October 2008, 05:22 PM   #8
Malloy
New Member
 
Join Date: Oct 2008
Posts: 8
Default

A followup post would be in order.

Good and bad news (well, no news is bad news in this case).

I had the opportunity to try out a MFC RC 40cm fin on my board, and wow what a difference. Not only did the amounts of spinouts drop, but the board felt much more at ease at higher speeds. Soon I'll be able to try out the 44cm version, but ultimately I would like the try out 36 and 38s.

That was the good news, a positive experience with MFC. The negative news, or complete lack of news, is that I, as I mentioned last week, mailed Vector Fins for availability and prices and have heard absolutely nothing from them, no response, no automated message... nothing. Its too bad, and a little bit irritating since I really wanted to try out one of their fins. I'll give them a few more weeks to respond, but after that I'll probably just give up and spend my money with MFC.

Again thanks to y'all for your feedback!
Malloy is offline   Reply With Quote
Old 26th October 2008, 08:00 PM   #9
nonopr
Member
 
Join Date: Aug 2008
Location: San Juan, Puerto Rico
Posts: 573
Default

Malloy: HEre is Jeff's email information Jeff Fagerholm: jeff@vectorfins.com.
Very strange he has not responded to your messages.
Hope you get to try them. Vector Fins
nonopr is offline   Reply With Quote
Old 26th October 2008, 11:49 PM   #10
Unregistered
Guest
 
Posts: n/a
Default

Hay Malloy,
don't waste your time and buy 2 Tectonics Tomacat (40-38).I use also a 42 in very little wind for the size but the secret comes from the balance between sail trim/fin size/boom height/mast base position.
Just put you footstraps all the way back,the mast base behind the 2nd line on the mast track,boom on chin level,put your 40 in and a good 7,8 and then you MUST push as hard as you can.Later you'll find some true speed...
  Reply With Quote
Reply

Bookmarks

Tags
None

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +7. The time now is 06:39 AM.