Question for Starboard on 162 and FOD

SIN_0 · 31st October 2008, 08:21 PM

i may want to get a 162 to replace my old 161 in early Jan 09.

what's the difference between 162 and a FOD board ?
can i use the 162 stock fin for FOD in future (if i decided to get a FOD rig ?)

any gap on performance on between 162 and FOD board (eg, weight, made etc...)

any other comments on these 2 boards ?

thank you

3rd November 2008, 06:35 AM

Yes is a very good question.... Will we can race in the 162 as FOD? what about the fin, we cqn use any Deboichet

3rd November 2008, 11:21 AM

Hi, to add on to the thread starter's question, what are the differences between the 161 and 162?

Is there much performance gain between the 2 in lightwind (8-12 knots)/stronger winds (12-15 knots)

thanks!

Remi · 3rd November 2008, 12:31 PM

Hi SIN 0,

This 2 board are the same but the FOD have an extra paint so is heavier by 300 grames.

This have no affect on the performances.

The FOD is One Design so the Fin have to be the one design one made by Deboichet Custom so better than the production Drake one who is deliver with the 162.

All the best

SIN_0 · 6th November 2008, 07:16 AM

Hi Remi,

i will just stick to the 162 till FOD is officially confirmed

rgds

7th November 2008, 03:26 PM

SIN_0
The decision to go FOD or RSX will be made this week at the ISAF conference.

31st October 2008, 08:21 PM	#1
SIN_0 New Member Join Date: Sep 2006 Posts: 9	Question for Starboard on 162 and FOD i may want to get a 162 to replace my old 161 in early Jan 09. what's the difference between 162 and a FOD board ? can i use the 162 stock fin for FOD in future (if i decided to get a FOD rig ?) any gap on performance on between 162 and FOD board (eg, weight, made etc...) any other comments on these 2 boards ? thank you

3rd November 2008, 12:31 PM	#4
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,334	Hi SIN 0, This 2 board are the same but the FOD have an extra paint so is heavier by 300 grames. This have no affect on the performances. The FOD is One Design so the Fin have to be the one design one made by Deboichet Custom so better than the production Drake one who is deliver with the 162. All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

3rd November 2008, 06:35 AM	#2
Unregistered Guest Posts: n/a	Yes is a very good question.... Will we can race in the 162 as FOD? what about the fin, we cqn use any Deboichet

3rd November 2008, 11:21 AM	#3
Bats Guest Posts: n/a	Hi, to add on to the thread starter's question, what are the differences between the 161 and 162? Is there much performance gain between the 2 in lightwind (8-12 knots)/stronger winds (12-15 knots) thanks!

6th November 2008, 07:16 AM	#5
SIN_0 New Member Join Date: Sep 2006 Posts: 9	Hi Remi, i will just stick to the 162 till FOD is officially confirmed rgds

7th November 2008, 03:26 PM	#6
Unregistered Guest Posts: n/a	SIN_0 The decision to go FOD or RSX will be made this week at the ISAF conference.