sail quiver for kombat 106 and carve 133 - Page 2

francis · 8th November 2008, 12:53 AM

Quote:

Originally Posted by PG

What brand?

AMEX, however my focus is on sizes and sail type, not a specific model

PG · 8th November 2008, 03:37 AM

OK,
AMEX SDM masts have been rumored to be middle of the way with regards to bend, and some measurements, see http://www.peterman.dk/masts-all-imcs01.htm, does support it. You mast probably has a 12-13% bend curve.

If you want to get the best out of your very good mast then
- the top is too stiff for Neil Pryde sails
- the top is too soft for Maui Sails, and probably also for Gaastra.
- A good bet is at least Severne, Simmer and Sailworks.

I think you should go about 5.3, 6.0, 7.0, 8.5. And potentially switch the 8.5 for a Severne Glide 7.5 which has about as much bottom end as a regular freerace 9.0 sail.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

8th November 2008, 03:37 AM	#12
PG Member Join Date: Aug 2006 Posts: 234	OK, AMEX SDM masts have been rumored to be middle of the way with regards to bend, and some measurements, see http://www.peterman.dk/masts-all-imcs01.htm, does support it. You mast probably has a 12-13% bend curve. If you want to get the best out of your very good mast then - the top is too stiff for Neil Pryde sails - the top is too soft for Maui Sails, and probably also for Gaastra. - A good bet is at least Severne, Simmer and Sailworks. I think you should go about 5.3, 6.0, 7.0, 8.5. And potentially switch the 8.5 for a Severne Glide 7.5 which has about as much bottom end as a regular freerace 9.0 sail.