Severne Code red09 rigging

Rbp · 14th March 2010, 08:43 PM

Hi, I just bought a second hand 2009 code red. I have got at few questions about rigging.

There was no mastplug on the sail, and it looks like it is designed that way. Is this right?

There is a lot of the sail touching the boom, almost all the way forward to the harness lines. Should i put on more outhaul or is it just supposed to be this way?

Rene

nonopr · 15th March 2010, 01:48 AM

First of all you need to tell us the size?
What mast you have for that size of sail and how much extension you are suing for that size sail.
Thanks

Rbp · 28th March 2010, 07:45 PM

Hi it is a 7.0 sail and i am using 460 mast with recommended downhaul
First i tried using a neilpryde mast, since then i have used a gun constant curve mast. It helped a great deal on the problem with the sail touching the boom, however there are some vertical lines in the luff sleeve that i can get out by using 4-5 cm extra outhaul, the sail looks better with the extra outhaul and still has a good profile.

Can i get the wrinkels in the luffsleeve out by aplying spacers. The cams are very easy to snap on and rotate very easily.

This picture is the sail with recommended outhaul and downhaul. How does the sail look and what wolud you change?

kennatt · 31st March 2010, 10:02 PM

my 7.7 is just like that creases in the luff the severn rep told me that they are all like that to allow flexing.\your third batton down could do with more tention as does the one below the boom.Tried on several different masts still has the creases so he may be right. Someone from the team should be able to assist ,where are you then??

pfaffi · 2nd April 2010, 12:06 PM

not enough downhaul!!!!!
the lose material between top and second batten should go much closer to the mast pocket. Same for lose material between second and third battten - should go app. 20cm to the left of your tiki (photo).
BR
pfaffi

Rbp · 4th April 2010, 09:31 PM

Hi, i am in denmark. Gonna contact the local severne dealer regarding my other questions. I could only get 5-10cm left of the tiki. It was impossible to pull anymore. Even with formuline. But it worked very well on the water, and felt fast as ****.
Thanks

14th March 2010, 08:43 PM	#1
Rbp New Member Join Date: Feb 2010 Posts: 4	Severne Code red09 rigging Hi, I just bought a second hand 2009 code red. I have got at few questions about rigging. There was no mastplug on the sail, and it looks like it is designed that way. Is this right? There is a lot of the sail touching the boom, almost all the way forward to the harness lines. Should i put on more outhaul or is it just supposed to be this way? Rene

28th March 2010, 07:45 PM	#3
Rbp New Member Join Date: Feb 2010 Posts: 4	Hi it is a 7.0 sail and i am using 460 mast with recommended downhaul First i tried using a neilpryde mast, since then i have used a gun constant curve mast. It helped a great deal on the problem with the sail touching the boom, however there are some vertical lines in the luff sleeve that i can get out by using 4-5 cm extra outhaul, the sail looks better with the extra outhaul and still has a good profile. Can i get the wrinkels in the luffsleeve out by aplying spacers. The cams are very easy to snap on and rotate very easily. This picture is the sail with recommended outhaul and downhaul. How does the sail look and what wolud you change? Last edited by Rbp; 29th March 2010 at 12:38 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Severne Code Red 2009	michelb	Spanish Forum	0	13th January 2009 06:06 PM
Severne code red info	Unregistered	Free Forum	15	29th April 2008 08:08 PM
severne code red cam et rdm	eliand	French Forum	1	22nd July 2007 05:00 PM
Severne Code Red 2 - mast tip extension	pfaffi	Free Forum	6	15th May 2007 06:21 PM
Severne Code: Red CR2	Julian	Free Forum	2	14th February 2007 06:42 AM

15th March 2010, 01:48 AM	#2
nonopr Member Join Date: Aug 2008 Location: San Juan, Puerto Rico Posts: 572	First of all you need to tell us the size? What mast you have for that size of sail and how much extension you are suing for that size sail. Thanks

31st March 2010, 10:02 PM	#4
kennatt Member Join Date: Aug 2006 Posts: 33	my 7.7 is just like that creases in the luff the severn rep told me that they are all like that to allow flexing.\your third batton down could do with more tention as does the one below the boom.Tried on several different masts still has the creases so he may be right. Someone from the team should be able to assist ,where are you then??

2nd April 2010, 12:06 PM	#5
pfaffi Member Join Date: Jan 1970 Location: Austria - Lake Neusiedler, closed Vienna Posts: 136	not enough downhaul!!!!! the lose material between top and second batten should go much closer to the mast pocket. Same for lose material between second and third battten - should go app. 20cm to the left of your tiki (photo). BR pfaffi

4th April 2010, 09:31 PM	#6
Rbp New Member Join Date: Feb 2010 Posts: 4	Hi, i am in denmark. Gonna contact the local severne dealer regarding my other questions. I could only get 5-10cm left of the tiki. It was impossible to pull anymore. Even with formuline. But it worked very well on the water, and felt fast as ****. Thanks