Remi: isonic 101 or 94?

5th February 2010, 01:06 PM

Hello.
I am hesitating between getting the isonic 101 or the IS 94.
sail to be used: 6.7 vapor
my weight 64kg

will I gain much on the low end with a 101 in ur opinion?

thks

M

Remi · 6th February 2010, 10:21 AM

Hi M,

At 64 kg and 6,7m² the wind range will be bigger on the 94. With your light weight their will be not so much difference but in the hi winds yes. The 94 will be more easier in chop to strong chop.

Hope this help and have nice time on the water whatever you choose.

All the best

13th February 2010, 10:51 PM

thank you Remi.

5th February 2010, 01:06 PM	#1
Unregistered Guest Posts: n/a	Remi: isonic 101 or 94? Hello. I am hesitating between getting the isonic 101 or the IS 94. sail to be used: 6.7 vapor my weight 64kg will I gain much on the low end with a 101 in ur opinion? thks M

6th February 2010, 10:21 AM	#2
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,339	Hi M, At 64 kg and 6,7m² the wind range will be bigger on the 94. With your light weight their will be not so much difference but in the hi winds yes. The 94 will be more easier in chop to strong chop. Hope this help and have nice time on the water whatever you choose. All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Q for Remi, setup Isonic 145	Jacco	Ask Our Team	0	20th January 2010 08:35 PM
Question for Remi. iSonic 133 vs. iSonic 150?	Grant	Ask Our Team	9	7th August 2008 01:30 AM
for REMI -> New iSonic 144	Expander	Ask Our Team	1	12th August 2007 11:26 PM
isonic 111 fin - Remi	Guest	Free Forum	3	30th January 2007 06:11 PM
Question to Ian and Remi on iSonic 145/155	paulk	Ask Our Team	11	2nd September 2006 09:45 AM

13th February 2010, 10:51 PM	#3
Unregistered Guest Posts: n/a	thank you Remi.