Isonic 121 2010 Fin Bolt length question

joules · 28th February 2010, 02:53 PM

Hi all,

I have a question regarding fin bolt length for the Isonic 121 (2010).

In the fin bolt chart the lengths specified are:
M6X70+80

Can anyone confirm whether these are the lengths for a Tuttle fin?
What are the lengths for Deep Tuttle (M6x60+65?).

Best regards,

Julian

pfaffi · 2nd March 2010, 08:06 PM

a deep tuttle is app. 20mm longer than a normal tuttle.
Depends were the nuts (inserts) are positioned. ->
So calculate with 15-20mm shorter screws for deep tuttle
pfaffi

joules · 7th March 2010, 02:08 AM

Hi Pfaffi,

Thanks for your feedback.

I cut some bolts to size, ended up with 65mm and 60mm length bolts for my deeptuttle fins.

I do wonder why my 121 was supplied with tuttle bolts only (70 and 80mm). It would make sense to supply deeptuttle bolts too, the 121 after all has a dt finbox. And add the deeptuttle sizes to the fin bolt chart?

Gr. Julian

nonopr · 7th March 2010, 03:04 AM

They provide the longer screws beacuse they used to ship all boards with Regular Tuttle box. This year they did not ship boards with Fins. Drake Fins who is part of the Starboard companies used to supply all the fins for Starboard and they only made deep tuttle fins fr formula.
You can always cut the screw to the correct lenght or buy some online or in the local hardwear store

28th February 2010, 02:53 PM	#1
joules New Member Join Date: Feb 2010 Posts: 3	Isonic 121 2010 Fin Bolt length question Hi all, I have a question regarding fin bolt length for the Isonic 121 (2010). In the fin bolt chart the lengths specified are: M6X70+80 Can anyone confirm whether these are the lengths for a Tuttle fin? What are the lengths for Deep Tuttle (M6x60+65?). Best regards, Julian

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Départ au planning entre isonic 94 2010 et 101 2010	titouan	French Forum	1	31st October 2009 12:15 PM
2010 isonic 121 weight?	HI TECH	Ask Our Team	4	16th October 2009 02:03 AM
Bolt size for my new fin	Roly Gardner	Windsurfing School	5	11th October 2007 08:22 PM
Harness Line Length Question	benpfree	Kevin`s Corner	7	29th April 2007 06:07 PM
iSonic length question	jeroenmarcia	Ask Our Team	1	12th September 2006 06:02 AM

2nd March 2010, 08:06 PM	#2
pfaffi Member Join Date: Jan 1970 Location: Austria - Lake Neusiedler, closed Vienna Posts: 136	a deep tuttle is app. 20mm longer than a normal tuttle. Depends were the nuts (inserts) are positioned. -> So calculate with 15-20mm shorter screws for deep tuttle pfaffi

7th March 2010, 02:08 AM	#3
joules New Member Join Date: Feb 2010 Posts: 3	Hi Pfaffi, Thanks for your feedback. I cut some bolts to size, ended up with 65mm and 60mm length bolts for my deeptuttle fins. I do wonder why my 121 was supplied with tuttle bolts only (70 and 80mm). It would make sense to supply deeptuttle bolts too, the 121 after all has a dt finbox. And add the deeptuttle sizes to the fin bolt chart? Gr. Julian

7th March 2010, 03:04 AM	#4
nonopr Member Join Date: Aug 2008 Location: San Juan, Puerto Rico Posts: 573	They provide the longer screws beacuse they used to ship all boards with Regular Tuttle box. This year they did not ship boards with Fins. Drake Fins who is part of the Starboard companies used to supply all the fins for Starboard and they only made deep tuttle fins fr formula. You can always cut the screw to the correct lenght or buy some online or in the local hardwear store