Go Back   Starboard Forums > Ask Our Team

Reply
 
Thread Tools Display Modes
Old 3rd April 2010, 12:43 AM   #1
daan.everaarts1
New Member
 
Join Date: Apr 2010
Posts: 9
Default Vin isonic 121 and 101 2010

Could you advise me about finsize ?
1. SB 121 2010
Sail: 8.4 RS Racing 2008
2. SB 121 2010
Sail: 7.2 RS Racing 2008
3. SB 101 2010
Sail: 7.2 and 6.2 RS Racing 2008
My weight: 94 kgs
Length : 188cm
I'm thinking about buying a Select S10 47 cm. are the S10 fins good for iSonic ?
Good idea ?
Thanks for your advise !
daan.everaarts1 is offline   Reply With Quote
Old 3rd April 2010, 01:12 AM   #2
kvda
Member
 
Join Date: Oct 2006
Posts: 173
Default

The isonic 101 2010 / 7.2 combo for me (1.89/ 94 kgs!) is great with Goldwing 38;
6.2 with 36/34...

Don't have a 121, but an 125. The 8.4/121 should be fine with a decent 44/46 and the 7.2/121 with a good 38/40 depending on your style, wind and waterconditions.
kvda is offline   Reply With Quote
Old 4th April 2010, 03:35 AM   #3
daan.everaarts1
New Member
 
Join Date: Apr 2010
Posts: 9
Default

Thanks for your advice.
daan.everaarts1 is offline   Reply With Quote
Old 4th April 2010, 02:00 PM   #4
davide
Member
 
Join Date: Oct 2006
Posts: 248
Default

I find the new Tectonics Talon a great fin for my Isonic 111. I use a 40 with a 7.3.

Last edited by davide; 8th April 2010 at 11:10 AM.
davide is offline   Reply With Quote
Old 5th April 2010, 04:05 AM   #5
daan.everaarts1
New Member
 
Join Date: Apr 2010
Posts: 9
Default

Thanks, Davide. Has anyone tried the select S10 under the iSonic ?
daan.everaarts1 is offline   Reply With Quote
Old 5th April 2010, 04:46 AM   #6
nonopr
Member
 
Join Date: Aug 2008
Location: San Juan, Puerto Rico
Posts: 573
Default

I dont think many people has used the Selct fins with iSonics. I haven't and i wont either.
nonopr is offline   Reply With Quote
Old 5th April 2010, 04:50 AM   #7
Remi
STARBOARD DEVELOPMENT
 
Join Date: Aug 2006
Location: Thailand
Posts: 2,424
Default

Hi daan.everaarts1,

For the S10, I don't know but as far I see nobody use Select in PWA but this not meams that this fin is not a good one.

My best choice on iSonic 121/8,4 : R16 44cm ; Sl4 42/7,2 & I use my 6,2 on iSonic 94 or 86

Hope this help

All the best
__________________
Rémi

Can answer if you have any questions on this following boards :

Carve 111, 121, 131, 141, 151 & 161
Futura 93, 101, 111, 121, 131 & 141.
iSonic 80, 87, 90, 97, 107, 110, 117 & 130
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

UltraSonic 147
Formula Experience One Design
Phantom Race 377 & 377 L / 320
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Phantom 295 L :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Formula 167 :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Racing Serinity Cat Concept
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Remi is offline   Reply With Quote
Old 6th April 2010, 02:07 AM   #8
daan.everaarts1
New Member
 
Join Date: Apr 2010
Posts: 9
Default

Thanks very much Remi. I will look for de deboichets.
daan.everaarts1 is offline   Reply With Quote
Old 6th April 2010, 07:16 AM   #9
willy
Member
 
Join Date: Aug 2007
Location: Buenos Aires- Argentina
Posts: 71
Default

Hi Daan, of all your list i can talk about the IS101, my weight 70kilo and i use for gps downwind a great venom 34 and for regular slalom a deb sl2 36 that raises the board a lot and makes it very fast, always talking about sails koncept 6.6 and 5.8
Rgds.
__________________
Willy the smilie.
The toys: iSonic 101, iSonic 94, Manta 59, JP FreestyleWave 85, Retired in museum Thommen 270.
KA Koncept 7.5 - 6.6 - 5.8 - Neil Pryde Zone 5.3 - 5.7
Fins: C3 Venoms, Stings, Deboichet SL2, Goldwing 36.
The rider: Senior 60+ but exellent shape, yearly Cabarete rider last time in 2011, GPS 33.4 knots speedster. What else?
Las Islas Malvinas fueron en 1833, son y seran Argentinas!
willy is offline   Reply With Quote
Old 7th April 2010, 12:11 PM   #10
daan.everaarts1
New Member
 
Join Date: Apr 2010
Posts: 9
Default

Thanks, Willy. I think I will try one of the fins you use.
daan.everaarts1 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
iSonic 131 WoodCarbon 2010 Marko CRO169 Kevin`s Corner 13 3rd October 2010 12:26 PM
Isonic 101 2010 and MKIII 7.0 kvda Free Forum 6 3rd April 2010 02:03 PM
Fin suggestions for ISONIC 150 2010 Heka Ask Our Team 2 28th March 2010 10:19 PM
Départ au planning entre isonic 94 2010 et 101 2010 titouan French Forum 1 31st October 2009 12:15 PM
2010 isonic 121 weight? HI TECH Ask Our Team 4 16th October 2009 02:03 AM


All times are GMT +7. The time now is 07:21 PM.