|3rd November 2010, 07:42 AM||#1|
Join Date: Nov 2010
Futura 101 fins?
I just bought a Futura 101, wood. It came with 38cm fin. I sail mostly with a 7.0m Naish Stealth sail and 6.0 non cambered Neilpryde sail. What size of fin would match better with the 6.0m sail?
|3rd November 2010, 03:08 PM||#2|
Join Date: Apr 2009
Depends on the conditions. If you're underpowered on the 6.0m you'll probably appreciate the 38cm. If you're really over powered a standard 34cm fin might be better, or a 36cm Venom (which is what I use on my Futura 93l).
It's probably best to ride the board with just that fin for the moment. Get a feel for it, and if you're having major control issues when sailing the 6.0m well or overpowered, then consider a smaller fin to increase the board's range. 6.0m -7.0m is not a very big jump and these are ideal sails for the F101 so personally I would just stick to one fin, as new fins are pretty expensive. If your sail gap was bigger than 1m, say 7.5m to 5.5m, then it would probably be worth getting an additional fin.
One side note: shorter fins do not always make it easier to sail overpowered. This is because in heavy chop with a lot of power in the sail it is often easy to get spinout, with the fin always out of the water and a lot of pressure on the back foot. Having a longer fin will save you spinouts. In addition, a bigger fin will trim the board to be higher over the water, making impacts with chop less brutal.
JP Super-X 106l, North F8 Ram: 5.8m,
|fin size, futura 101|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Fins for Futura 111||Fernando Luz||Windsurfing School||0||29th August 2010 11:35 PM|
|Futura 122 Fins||Windnc||Free Forum||9||9th August 2009 03:05 PM|
|Futura 122 Fins||Windnc||Free Forum||1||28th February 2009 01:13 AM|
|futura 133 fins||eli villalabeitia||Ask Our Team||6||16th January 2009 09:22 AM|
|Fins for Futura 101||kvda||Ask Our Team||9||14th July 2008 07:18 PM|