Tuttle vs deep tuttle?

zcota · 4th July 2011, 05:29 PM

Can I use tuttle fin instead deep tuttle on iSonic 127 2011. Fin wil be Select elite 41?

Roger · 4th July 2011, 09:48 PM

Hi zcota,
Yes, the std.Tuttle fin head should fit perfectly in the Deep Tuttle fin box.
The difference between Deep Tuttle and Std. Tuttle is the height of the fin
head (fin root).
You will need longer fin screws as the stock fin screws will be approx.
18 mm too short. So you need fin screws that are about 20 mm longer than what
came with your board.

The Deep Tuttle fin head is recommended to provide more support and structural strength for fins
with a span greater than (>) 55-60 cm. so for a 41 cm the Std. Tuttle fin should be more than
strong enough.
Hope this helps,
Roger

Remi · 5th July 2011, 07:15 AM

Hi Zcota,

41 look like extremely small for this board, wich sail you use?

All the best

4th July 2011, 05:29 PM	#1
zcota New Member Join Date: Jul 2011 Posts: 1	Tuttle vs deep tuttle? Can I use tuttle fin instead deep tuttle on iSonic 127 2011. Fin wil be Select elite 41?

5th July 2011, 07:15 AM	#3
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,339	Hi Zcota, 41 look like extremely small for this board, wich sail you use? All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tuttle fin in Deep tuttle box?	prpa	Windsurfing School	5	27th July 2009 06:56 PM
Tuttle fin on deep tuttle box..?	Otrebla	Free Forum	2	20th May 2008 03:36 PM
Tuttle and Deep Tuttle	AlexWind	Free Forum	3	18th January 2008 03:08 PM
Tuttle/Deep Tuttle Cock Up	Roly Gardner	Windsurfing School	12	15th August 2007 11:22 PM
Tuttle fin in Deep Tuttle box	Romas	Free Forum	5	29th July 2007 10:50 PM

4th July 2011, 09:48 PM	#2
Roger Dream Team - School Guru Join Date: Aug 2006 Posts: 2,060	Hi zcota, Yes, the std.Tuttle fin head should fit perfectly in the Deep Tuttle fin box. The difference between Deep Tuttle and Std. Tuttle is the height of the fin head (fin root). You will need longer fin screws as the stock fin screws will be approx. 18 mm too short. So you need fin screws that are about 20 mm longer than what came with your board. The Deep Tuttle fin head is recommended to provide more support and structural strength for fins with a span greater than (>) 55-60 cm. so for a 41 cm the Std. Tuttle fin should be more than strong enough. Hope this helps, Roger