Go Back   Starboard Forums > Ask Our Team

Thread Tools Display Modes
Old 8th August 2007, 09:21 PM   #1
New Member
Join Date: Sep 2006
Posts: 10
Default RDM cam adapters for CR 5.6

I have just received my new severne code red 5.6. I will use it on my severne RDM mast, however, the cam adapters didn-t arrive with the sail (although ordered with the sail). Supposedly, the guys at APM didn't have them.

What would happen if i were to use the sail with the normal cams on the RDM mast? Can i help myself with a bunch of spacers to fill the space? Would the wider cams destroy the sail?

Any othe suggestions what I can do?

veedot is offline   Reply With Quote
Old 11th August 2007, 07:32 AM   #2
Ian Fox
Join Date: Aug 2006
Posts: 533
Default RE: RDM cam adapters for CR 5.6

Hi VeeDot,

It's possible to use the existing SDM cams and additional spacers to fit for RDM, or change to slightly smaller diameter cams (from upper SDM position/s)and use the extra spacers. The fitment result is not so ideal from a practical rating, as the cam/spacers don't stay so well on the batten interface when rigging/derigging (esp in crazy 5.6m hi winds), and (as you know) the cams are slightly bigger which distort but not damage the luff sleeve.

I agree it's not ideal, and FYI I'm now using SDM400 in CR-R2 5.6m.

Cheers ~ Ian
Ian Fox is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +7. The time now is 01:26 PM.