|
|
|
|
#1 |
|
New Member
Join Date: Aug 2006
Posts: 5
|
Did SB change the plugs during the 2006 production? I just purchased a new Pure Acid 80 (wood) from my dealer, who ordered and received this board 2 weeks ago (beginning of August).
There are only standard footstrap plugs, and I hoped to get plugs with the anti-twist devices K9 as they have been praised on the SB site and in some tests. In the German surf (March issue) was a picture of a Pure Acid 73 with the new plug (oval slot between the screw holes). But the worse thing is that old 2005 foot straps have been delivered. I contacted my dealer and will wait for the exchange. Hope for an answer about the K9 issue. Tx, Andi |
|
|
|
|
|
#2 |
|
TEAM
Join Date: Aug 2006
Posts: 1,191
|
The first batch of 06 boards were delivered without K9 and the very first also with the old straps. My PA73 06 didn't have the K9 either.
|
|
|
|
|
|
#3 |
|
New Member
Join Date: Aug 2006
Posts: 5
|
Ola, tx for clarification.
Indeed my board has a low serial number (ending 0010). I'm wondering why my dealer (and me) is getting delivered a first batch board in August 2006 by Starboard Germany . One of the reasons I looked for a Starboard was about details like the footstraps stuff.
|
|
|
|
|
|
#4 |
|
STARBOARD
Join Date: Aug 2006
Posts: 532
|
Hi Surfag,
The boards are shipped from the factory to importer/distributor basically in order of production, which = order of serial numbers. It's a pity that you have missed out on K9's if you really wanted them. My 06 PA80 also missed out, totally fine and no problem without them. In fact a lot of guys are not using them even when shipped, inc me !!) Make sure you get the strap exchange/upgrade though. That one really does count... Cheers ~ Ian |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|