Old 21st January 2010, 12:53 PM   #1
baldy
New Member
 
Join Date: Feb 2009
Posts: 3
Default Regripping 2006 Isonic

G'Day
just bought a 2nd hand 2006 Isonic 115 and the decks a bit on the slippery side. Thought i'd re do the deck the usual way - wash clean with acetone, mask up area and then roll on a thin coat of polyester resin (UV stable) then sprinkle with sugar.
Any comments or advice?
I've recently done my old Windtech this way with good results but i'd completely stripped that back and repainted it. With the Isonic i'll be leaving what grip there is left and adding to it.

Cheers
baldy is offline   Reply With Quote
Old 21st January 2010, 04:13 PM   #2
mark h
Member
 
Join Date: Aug 2006
Location: NW England,
Posts: 707
Default

Hi Baldy
Not sure about the sugar thing, but you can get spray on and roll on re-grip products that would probably be better that sugar

Plenty of choice around, here's one link to Gunsails version:

http://www.windsurfer.co.uk/paintapplication.htm
__________________
Cheers - Mark H

The toys:
iSW44 - - iSW49 - iSW53 - iSW58 - iS107 - iS137 - F161.
North Warps: F2012 5.2m, 5.7m, 6.3m, 7m, 8m, 8.6m, 9.5m F2006 11m.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
mark h is offline   Reply With Quote
Old 21st January 2010, 04:53 PM   #3
Remi
STARBOARD DEVELOPMENT
 
Join Date: Aug 2006
Location: Thailand
Posts: 2,425
Default

Hi Badly,

I use the Nautix one to fix this problem and is perfect.

Hope this help

All the best
__________________
Rémi

Can answer if you have any questions on this following boards :

Carve 111, 121, 131, 141, 151 & 161
Futura 93, 101, 111, 121, 131 & 141.
iSonic 80, 87, 90, 97, 107, 110, 117 & 130
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

UltraSonic 147
Formula Experience One Design
Phantom Race 377 & 377 L / 320
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Phantom 295 L :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Formula 167 :
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Racing Serinity Cat Concept
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Remi is offline   Reply With Quote
Old 24th January 2010, 08:35 AM   #4
Mike T
Member
 
Join Date: Jul 2007
Posts: 64
Default

Baldy
Did you mean roll on uv Epoxy resin or Polyester resin? Because I don't think it's a good idea to coat the board with polyester resin it won't bond well to epoxy. Also you might want to take a look at this product.
http://www.paddlesurfwarehouse.com/m...le-boards.html or use the stuff Remi said, a friend of mine has used it and it worked well for him I think he said he did two or three boards with the two part kit. good luck. Cheers. Michael
Mike T is offline   Reply With Quote
Reply

Bookmarks

Tags
None

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Isonic 94 (2006-7) v Isonic 96 (2007-8) rayberg Ask Our Team 0 24th November 2007 09:20 AM
Isonic 135 2006. Guest Free Forum 0 28th April 2007 11:00 PM
fin for isonic 105 2006 fotpap Ask Our Team 3 13th April 2007 11:41 PM
Isonic 135 2006 JGue Windsurfing School 3 21st February 2007 11:36 AM
Isonic 2007 -> 2006 changes Tim L Free Forum 11 9th September 2006 09:02 PM


All times are GMT +7. The time now is 10:12 PM.