Strange boardbag details

jgramtorp · 8th February 2010, 03:02 AM

I have just bought a 2009 isonic 111 with a strange bordbag.
It was originally designed for 2006: Aero 117, Aero 127, Starsurfer S and Starsurfer M.

It has a number of peculiar details:

1: On top of the rear end it has two white pulley wheels placed on the axis of the bag (approximately 10cm and 20cm from the rear end). They can not rotate. What are they intended for?

2: Inside the bag there is a strap almost 1m long starting right in front of the fin opening in the bottom. What is it intended for?

Does anyone know the datails for this bag?

Johan
isonic 111 NP Racing EVO II 7.8

Ola_H · 8th February 2010, 03:16 PM

1. It's for a set of big wheels you can attach. If you don't intend to get such wheels you can take the pulley wheels away. There is a nut and a washer on the inside and a screw on the outside. One set for each of the wheels.

2. This is to stand on when you push the board inside. Makes it easier to get the board in. Maybe not the most necessary detail...

jgramtorp · 8th February 2010, 05:52 PM

Hi

Thank you very much for the info. Very helpfull!

Best regards

Johan

8th February 2010, 03:02 AM	#1
jgramtorp New Member Join Date: Feb 2010 Posts: 2	Strange boardbag details I have just bought a 2009 isonic 111 with a strange bordbag. It was originally designed for 2006: Aero 117, Aero 127, Starsurfer S and Starsurfer M. It has a number of peculiar details: 1: On top of the rear end it has two white pulley wheels placed on the axis of the bag (approximately 10cm and 20cm from the rear end). They can not rotate. What are they intended for? 2: Inside the bag there is a strap almost 1m long starting right in front of the fin opening in the bottom. What is it intended for? Does anyone know the datails for this bag? Johan isonic 111 NP Racing EVO II 7.8

8th February 2010, 05:52 PM	#3
jgramtorp New Member Join Date: Feb 2010 Posts: 2	Hard to guess... Hi Thank you very much for the info. Very helpfull! Best regards Johan

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
details on new Phantom320 Carbon? Best of allwind race/fun compromise	mcasaldaliga	Free Forum	7	27th September 2009 05:14 PM
2009 SB site/board details	mark h	Ask Our Team	5	17th August 2008 06:26 PM
Boardbag for 162	Unregistered	Free Forum	2	18th December 2007 12:11 PM
isonic 101 malfunction-contact details needed	prigipas	Free Forum	1	20th July 2007 06:51 AM
boardbag s-type 115	Guest	Free Forum	0	7th February 2007 08:49 PM

8th February 2010, 03:16 PM	#2
Ola_H TEAM Join Date: Aug 2006 Posts: 1,191	1. It's for a set of big wheels you can attach. If you don't intend to get such wheels you can take the pulley wheels away. There is a nut and a washer on the inside and a screw on the outside. One set for each of the wheels. 2. This is to stand on when you push the board inside. Makes it easier to get the board in. Maybe not the most necessary detail...