Old 21st March 2008, 08:23 PM   #1
Unregistered
Guest
 
Posts: n/a
Default Fin length

Hello,

anyone knows what is the correct way to measure fin length:
- perpendicular to the board surface
or
- along the fin (fin is usually declined a bit): front edge or middle

Thanks for your answers,

G
  Reply With Quote
Old 22nd March 2008, 06:07 AM   #2
Roger
Dream Team - School Guru
 
Join Date: Aug 2006
Posts: 2,092
Default

Hi Unregistered,
Fin length (fin "span" actually) is measured from the bottom surface of the board to the deepest point perpendicular to the basically flat rear of the board.
Weed fins may be categorized a little differently, but the overall depth that you can sail the board in without the weed fin "dragging" is still the "fin span".
Depending on the configuration of the tip of the fin (i.e curved to the back, squared off,
etc.) the depth is always the max. distance from the bottom of the board in a direction
perpendicular to the flat surface from the front to the back of the fin box cavity.
It does not matter if the front edge, the middle, or the trailing edge (or somewhere in between these) is the point of max. depth.
Where ever the fin would strike the bottom first, that's the point at which you need to measure from the bottom of the board.
Hope this helps,
Roger is online now   Reply With Quote
Old 26th March 2008, 11:13 PM   #3
Lessacher
Member
 
Join Date: Sep 2006
Posts: 96
Default

Where ever the fin would strike the bottom first,thats the point at which to you need to
measure from the bottom of the board.
But only in an angle of 90 degrees from the bottom to the tip of the fin.
Wolfgang
Lessacher is offline   Reply With Quote
Reply

Bookmarks

Tags
None

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +7. The time now is 02:04 PM.