Isonic 122 with tuttle fins?

GFB · 18th June 2009, 03:24 AM

Hi there,
the isonic 122 should have a deep tuttle finbox, but I got two tuttle fins (drake slalom pro 40/46) from my dealer. Is it okay? Can I use tuttle fins in a deep tuttle finbox? Or can I damage the finbox?
Best regards
GFB

mim · 18th June 2009, 03:34 AM

Of course you can use it...there are also long screws for this board...
No worries, works fine!

Ciao M.

GFB · 18th June 2009, 03:41 AM

thanks for the information

GFB

nonopr · 18th June 2009, 05:22 AM

Factory fins are all tuttle for isonic. You are good.

GFB · 18th June 2009, 10:59 AM

thanks. it´s identical with the statement by jp
http://www.jp-australia.com/2009/index.php?id=292

GFB

18th June 2009, 03:24 AM	#1
GFB New Member Join Date: Apr 2009 Posts: 18	Isonic 122 with tuttle fins? Hi there, the isonic 122 should have a deep tuttle finbox, but I got two tuttle fins (drake slalom pro 40/46) from my dealer. Is it okay? Can I use tuttle fins in a deep tuttle finbox? Or can I damage the finbox? Best regards GFB

18th June 2009, 03:34 AM	#2
mim Member Join Date: Jun 2008 Location: Switzerland Posts: 196	Of course you can use it...there are also long screws for this board... No worries, works fine! Ciao M. __________________ PA 86 & eVo 100 (with S-1); iS 101 & 122 & 144 (with Overdrive)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

18th June 2009, 03:41 AM	#3
GFB New Member Join Date: Apr 2009 Posts: 18	thanks for the information GFB

18th June 2009, 05:22 AM	#4
nonopr Member Join Date: Aug 2008 Location: San Juan, Puerto Rico Posts: 572	Factory fins are all tuttle for isonic. You are good.

18th June 2009, 10:59 AM	#5
GFB New Member Join Date: Apr 2009 Posts: 18	thanks. it´s identical with the statement by jp http://www.jp-australia.com/2009/index.php?id=292 GFB