Go Back   Starboard Forums > Ask Our Team

Thread Tools Display Modes
Old 26th June 2009, 01:32 AM   #1
New Member
Join Date: Jun 2009
Posts: 1
Default repairing a footstrap hole

can I order a single round insert for a footstrap hole from starboard? I have a 2000 Go and one of the inserts popped out. If I can order some inserts what glue would you recommend?
patrickb is offline   Reply With Quote
Old 29th June 2009, 02:14 PM   #2
Join Date: Aug 2006
Posts: 1,191

I don't know how it works with the GO construction, but I will ask some of the other guys to come in and answer this.

Ola H.
Ola_H is offline   Reply With Quote
Old 1st July 2009, 11:23 PM   #3
Mike T
Join Date: Jul 2007
Posts: 64

If you take a look at the boardlady's web site http://www.boardlady.com/extrainserts1.htm, You can see how she puts inserts into a board. She also lists sources for supplies to do repairs and alot of good repair info on the site. Also if you don't do alot of repairs, West Systems Epoxy http://www.westsystem.com/ss/105-system-kits has a nice small repair pack that would be enough to do an insert and I think it has the slow cure hardner in the kit but double check it might only come with the fast cure. Also follow all safety requirements for epoxy you don't want to breath the vapors or the sanding dust! You can get chinook single inserts from Fiberglass supply or maybe a local windsurf shop. Only use Slow cure epoxy to repair an insert because fast cure epoxy produce to much heat during the curing process and will melt the EPS core. Hope this helps. Hope this helps, Mike
Mike T is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +7. The time now is 09:14 PM.