Deboichet R10 for Isonic 133

Maarten50 · 12th December 2009, 08:15 PM

Hallo,

I can buy a Deboichet R10 54 cm.
It must be suitable for my isonic 133 ( 2008 ) + Tushingham Lightning 9,4 m.
I don't know nothing about the Deboichet R10.
Can anybody advise me about this fin??

Or is the standard fin ( R13 52 cm Drake ) or a Select RS7 51/53 cm the best choice?

Maarten

nonopr · 13th December 2009, 03:13 AM

What is a R10 deboichet. I have never seen that before.

mark h · 13th December 2009, 05:08 AM

nonopr, here's a pic

http://windsurfing.rdeleeuw.nl/tekoo...boichet_r10_54

nonopr · 13th December 2009, 05:50 AM

This fin is very old and probably wont work correctly with your 133 iSonic.
The reason is the rake on that fin is not good for the iSonic.
If I were to make a decision I will rather save the money and keep using the factory fin until you find an R16sl 52-54cm or buy the select.

IRL-250 · 14th December 2009, 01:08 AM

I've just ordered a 50cm Vector Maui Canefire for my I Sonic 144 to use with my 9.8m and 9.0m sails as the Canefires i have in smaller sizes are such good fins and work really well on my I Sonics.
Give Jeff at Vector Maui Fins www.vectorfins.com a shout and i am sure he will be able to sort you out with a good fin for your 133

nonopr · 14th December 2009, 01:47 AM

Canefires are great fins, but I have found them to be good up to 46cm in G10.
I can recommend them for sure. Also can recommend www.f4fins.com this are 100% carbon fins and they are very fast and slippery. Like them a lot more than the Deboichet fins.

Remi · 15th December 2009, 06:50 PM

Hi Marteen,

This fin was for the Formula boards at the beguining. Can be good but need to be modify. Change the rake to same as the R16.

All the best

surfrider · 13th January 2010, 02:59 PM

Quote:

Originally Posted by Remi

This fin was for the Formula boards at the beguining. Can be good but need to be modify. Change the rake to same as the R16.

I'm the one selling this R10 fin. I used it under a AHD GT85, indeed an older type of Formula/Wide Slalom board. the fin is a bit to small for me for the GT85, I can only use it when almost overpowered with a 8.3 Sail. That's why I'm selling it. My next board is an iSonic 115. So its much to big for the iSonic. I'm thinking about reboxing the R10 to 45cm and changing the rake to the smae rake as the Drake Slalom Pro.

12th December 2009, 08:15 PM	#1
Maarten50 New Member Join Date: Nov 2009 Posts: 9	Deboichet R10 for Isonic 133 Hallo, I can buy a Deboichet R10 54 cm. It must be suitable for my isonic 133 ( 2008 ) + Tushingham Lightning 9,4 m. I don't know nothing about the Deboichet R10. Can anybody advise me about this fin?? Or is the standard fin ( R13 52 cm Drake ) or a Select RS7 51/53 cm the best choice? Maarten Last edited by Maarten50; 12th December 2009 at 09:57 PM.

13th December 2009, 05:08 AM	#3
mark h Member Join Date: Aug 2006 Location: NW England, Posts: 663	nonopr, here's a pic http://windsurfing.rdeleeuw.nl/tekoo...boichet_r10_54 __________________ Cheers - Mark H The toys: iSW44 - - iSW49 - iSW53 - iSW58 - iS107 - iS137 - F161. North Warps: F2011 5.2m, 5.7m, 6.3m, 7m, 8m, 8.6m, 9.5m F2006 11m. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

14th December 2009, 01:08 AM	#5
IRL-250 Member Join Date: Jun 2009 Location: County Kerry, Ireland Posts: 56	I've just ordered a 50cm Vector Maui Canefire for my I Sonic 144 to use with my 9.8m and 9.0m sails as the Canefires i have in smaller sizes are such good fins and work really well on my I Sonics. Give Jeff at Vector Maui Fins www.vectorfins.com a shout and i am sure he will be able to sort you out with a good fin for your 133 __________________ Alastair IRL-250 KA Sails ( To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ) Chinook ( To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ) Vector Maui Fins ( To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ) Pro Motion Wetsuits ( To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ) Wind & Wave ( To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ) Curve ( To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ) Windsurfingfins ( To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ) KA Koncept 4.4, 5.0, 5.8, 6.6, 7.5, 8.3, 9.5 KA Kaos 4.2, 4.7, 5.3, KA Kult 5.8, 6.4m Starboard - Isonic Speed W53, Phantom 380, Quatro 85l Evil Twin Custom.

15th December 2009, 06:50 PM	#7
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,340	Hi Marteen, This fin was for the Formula boards at the beguining. Can be good but need to be modify. Change the rake to same as the R16. All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

13th December 2009, 03:13 AM	#2
nonopr Member Join Date: Aug 2008 Location: San Juan, Puerto Rico Posts: 572	What is a R10 deboichet. I have never seen that before.

13th December 2009, 05:50 AM	#4
nonopr Member Join Date: Aug 2008 Location: San Juan, Puerto Rico Posts: 572	This fin is very old and probably wont work correctly with your 133 iSonic. The reason is the rake on that fin is not good for the iSonic. If I were to make a decision I will rather save the money and keep using the factory fin until you find an R16sl 52-54cm or buy the select.

14th December 2009, 01:47 AM	#6
nonopr Member Join Date: Aug 2008 Location: San Juan, Puerto Rico Posts: 572	Canefires are great fins, but I have found them to be good up to 46cm in G10. I can recommend them for sure. Also can recommend www.f4fins.com this are 100% carbon fins and they are very fast and slippery. Like them a lot more than the Deboichet fins.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Get 10% discount on a Deboichet fin for your iSonic 2010	Remi	Ask Our Team	7	20th August 2010 05:43 PM
Deboichet UW Fin for Isonic 87	guicampos	Ask Our Team	1	12th September 2009 06:39 AM
Which Deboichet for iSonic 122?	AlexWind	Ask Our Team	3	25th March 2009 04:49 PM
Deboichet SL5 sur Isonic 87	zao	French Forum	3	1st October 2008 10:42 PM
deboichet for isonic 111 2007	civi	Kevin`s Corner	1	23rd November 2007 09:23 PM