Vapor 9.3; Isonic 131 fin choice?

Tarantula · 29th March 2010, 08:41 PM

Hello!

Which fin to choose for this combo? I am 98 kg, and I was thinking about Deboichet R16sl 48 or R16sl 50?

Thanks!

nonopr · 29th March 2010, 08:50 PM

I would use. a 52cm fin and a 50cm fin from www.f4fins.com Model D2 XS

Tarantula · 29th March 2010, 09:11 PM

Why not Deb R16sl?

nonopr · 30th March 2010, 12:26 AM

Because:
1. they dont ship on time.
2. Quality has fallen of the wagon.
3. They dont responde to emails.
4. F4 is a lot better in quality and is faster.

Remi · 30th March 2010, 05:52 AM

Hi Nonopr,

We try many fins for the iSonic 131 with our R&D Team Riders and the results was clear with the Deboichet R16 Slalom for this board.
And small compagnie with big demand have always delay as you say and quality is realy good.
If this fins are so good we would like to test them with our R&D Team, looking forward.
Did they use it actually in PWA and by who, thanks.

All the best

Tarantula · 30th March 2010, 02:36 PM

@ nonopr: How much they cost? I am in Europe!
@ Remi: Which size of R16sl for 9,3;131? 48;50;52??

Thanks

nonopr · 30th March 2010, 06:26 PM

Slalom fins cost about $300 full carbon and covers.
formula fins cost about $600.00

nonopr · 30th March 2010, 06:29 PM

Quote:

Originally Posted by Remi

Hi Nonopr,

We try many fins for the iSonic 131 with our R&D Team Riders and the results was clear with the Deboichet R16 Slalom for this board.
And small compagnie with big demand have always delay as you say and quality is realy good.
If this fins are so good we would like to test them with our R&D Team, looking forward.
Did they use it actually in PWA and by who, thanks.

All the best

Remi contact them directly at www.f4fins.com
I am very sure they will be more than happy to provide you ith some fins for testing.
You will be surprise who is riding them in the first slalom PWA race?????

Remi · 31st March 2010, 09:07 AM

Hi Tarantula,

PLease see the chart below, thanks

But just to know PWA Racers always use smaller for exemple Cyril Moussilmani use 48 with 9m² for 2 reason : Always down wind race and also more skill, hope this help

All the best

Tarantula · 31st March 2010, 02:38 PM

Thanks Remi! I already saw that chart, but because of that reason with PWA Racers (Kevin on 47) I wasnt shure about size. I will use that fin for slalom figure 8, so I belive 50 will be enough.

Thanks again!

29th March 2010, 08:41 PM	#1
Tarantula New Member Join Date: Aug 2006 Posts: 18	Vapor 9.3; Isonic 131 fin choice? Hello! Which fin to choose for this combo? I am 98 kg, and I was thinking about Deboichet R16sl 48 or R16sl 50? Thanks!

30th March 2010, 05:52 AM	#5
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,334	Hi Nonopr, We try many fins for the iSonic 131 with our R&D Team Riders and the results was clear with the Deboichet R16 Slalom for this board. And small compagnie with big demand have always delay as you say and quality is realy good. If this fins are so good we would like to test them with our R&D Team, looking forward. Did they use it actually in PWA and by who, thanks. All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

31st March 2010, 09:07 AM	#9
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,334	Hi Tarantula, PLease see the chart below, thanks But just to know PWA Racers always use smaller for exemple Cyril Moussilmani use 48 with 9m² for 2 reason : Always down wind race and also more skill, hope this help All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Last edited by Remi; 31st March 2010 at 09:11 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with my choice iSonic-Futura	SilverSurfer	Ask Our Team	11	4th April 2010 10:09 PM
Isonic 122 (09) and Vapor 9,3	stemeyer	Kevin`s Corner	3	18th March 2010 01:07 AM
isonic 133 Slalom sail choice	Oliver	Kevin`s Corner	4	19th September 2008 05:26 AM
Isonic 87 + vapor	Vincef	Kevin`s Corner	3	29th March 2008 12:21 AM
Isonic Choice	prsurf	Ask Our Team	4	5th June 2007 03:20 PM

29th March 2010, 08:50 PM	#2
nonopr Member Join Date: Aug 2008 Location: San Juan, Puerto Rico Posts: 572	I would use. a 52cm fin and a 50cm fin from www.f4fins.com Model D2 XS

29th March 2010, 09:11 PM	#3
Tarantula New Member Join Date: Aug 2006 Posts: 18	Why not Deb R16sl?

30th March 2010, 12:26 AM	#4
nonopr Member Join Date: Aug 2008 Location: San Juan, Puerto Rico Posts: 572	Because: 1. they dont ship on time. 2. Quality has fallen of the wagon. 3. They dont responde to emails. 4. F4 is a lot better in quality and is faster.

30th March 2010, 02:36 PM	#6
Tarantula New Member Join Date: Aug 2006 Posts: 18	@ nonopr: How much they cost? I am in Europe! @ Remi: Which size of R16sl for 9,3;131? 48;50;52?? Thanks

30th March 2010, 06:26 PM	#7
nonopr Member Join Date: Aug 2008 Location: San Juan, Puerto Rico Posts: 572	Slalom fins cost about $300 full carbon and covers. formula fins cost about $600.00

31st March 2010, 02:38 PM	#10
Tarantula New Member Join Date: Aug 2006 Posts: 18	Thanks Remi! I already saw that chart, but because of that reason with PWA Racers (Kevin on 47) I wasnt shure about size. I will use that fin for slalom figure 8, so I belive 50 will be enough. Thanks again!