fin for isonic 127

ggzaprešić · 8th July 2011, 05:31 PM

Dear All

I am litlle confuse. Recomendation in tehn. spec for isonic 127 for fin is next:
7,5m2-10m2 sail recomendation is fin 38-50cm.
On board I have recomendation for fin 44-52 cm.

For severne overdrive 7,5m2 I do not know if fin 41 (select ) ok ?

Thanks

GG

Marko CRO169 · 8th July 2011, 08:39 PM

Mislim da će ti biti premala, osim ako nije apsolutni flat i potpuni downwind, mislim da će ti trebati nekih 44cm (In my opinion a 41 fin will be too small, unless it is absolute flatwater and downwind sailing ... try some 44)

Roger · 8th July 2011, 10:22 PM

Hi Marko,
Thanks for your answer here.
Suppose you could translate it into English so the rest of us on this forum (those who do not
speak or read the Croation language) could benefit from your advice?
Thanks,
Roger

Marko CRO169 · 11th July 2011, 02:27 PM

Roger, you were right ... I added the eng. version ...
Regards,
Marko

ggzaprešić · 13th July 2011, 03:14 PM

thanks to everyone
it is what I thought but tech. spec confuse me

BR
GG

Chris Pressler · 18th July 2011, 04:39 PM

Hi GG,
the 7,5 will work ok with a fin around 45 - 46 cm on your iSonic 127 out of my view. It´s a wide board with a wide tail, which needs a longer fin. It doesn´t matter how small the sailsize gets. I just would go on a really short fin on the 127, if I would use the board for teaching intermediates or if the water water would be extremely shallow.

What´s your sailing level?

Cheers and hope it helps,

Chris

8th July 2011, 05:31 PM	#1
ggzaprešić New Member Join Date: Jul 2011 Posts: 4	fin for isonic 127 Dear All I am litlle confuse. Recomendation in tehn. spec for isonic 127 for fin is next: 7,5m2-10m2 sail recomendation is fin 38-50cm. On board I have recomendation for fin 44-52 cm. For severne overdrive 7,5m2 I do not know if fin 41 (select ) ok ? Thanks GG

8th July 2011, 08:39 PM	#2
Marko CRO169 Member Join Date: Aug 2009 Location: Zagreb, Croatia Posts: 42	Mislim da će ti biti premala, osim ako nije apsolutni flat i potpuni downwind, mislim da će ti trebati nekih 44cm (In my opinion a 41 fin will be too small, unless it is absolute flatwater and downwind sailing ... try some 44) Last edited by Marko CRO169; 11th July 2011 at 02:26 PM.

18th July 2011, 04:39 PM	#6
Chris Pressler Member Join Date: Sep 2006 Location: AUSTRIA, Lake Neusiedler Posts: 297	Hi GG, the 7,5 will work ok with a fin around 45 - 46 cm on your iSonic 127 out of my view. It´s a wide board with a wide tail, which needs a longer fin. It doesn´t matter how small the sailsize gets. I just would go on a really short fin on the 127, if I would use the board for teaching intermediates or if the water water would be extremely shallow. What´s your sailing level? Cheers and hope it helps, Chris __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

8th July 2011, 10:22 PM	#3
Roger Dream Team - School Guru Join Date: Aug 2006 Posts: 2,065	Hi Marko, Thanks for your answer here. Suppose you could translate it into English so the rest of us on this forum (those who do not speak or read the Croation language) could benefit from your advice? Thanks, Roger

11th July 2011, 02:27 PM	#4
Marko CRO169 Member Join Date: Aug 2009 Location: Zagreb, Croatia Posts: 42	Roger, you were right ... I added the eng. version ... Regards, Marko

13th July 2011, 03:14 PM	#5
ggzaprešić New Member Join Date: Jul 2011 Posts: 4	thanks to everyone it is what I thought but tech. spec confuse me BR GG