|12th August 2011, 07:11 AM||#1|
Join Date: Jun 2009
Scuffs, small dings, scratches...
Ahoy hoy again!
I have a Starboard Go 175 that I've been using pretty heavily. There are a lot of scuffs, very very small dings, and some scratches.
What can I do to clean these up, and what products will help me get it back to fighting shape? Like a smooth bottom again.
|12th August 2011, 11:39 AM||#2|
Dream Team - School Guru
Join Date: Aug 2006
Since your Go 175 has a white bottom, you can fill in scrathes and small dings (that do not extend through the outer skin of the board) with a white filled epoxy product.
A very available and easy to use suggestion is Marine Tex.
Mix a little of the two part Marine Tex and use a small plastic spreader to work it down into the scratches.
If the ding is on the rail, or a curved area, use several strips of 1/2" wide masking tape to compact the filler down into your dings. Take a pin and put a few small holes in the tape to let the air out.
When the Marine Tex sets up (cures) sand lightly and cover with a bit of paint.
Use epoxy or enamel white (that matches as close as possible) paint from a spray can.
Hope this helps,
|Thread||Thread Starter||Forum||Replies||Last Post|
|too small a fin ?||joe_windsurfer||Free Forum||9||18th May 2010 01:39 PM|
|Red Paint or Epoxy for Small Scratches Repair||agrelon||Free Forum||3||15th April 2010 06:50 PM|
|Dings and Dents on F159||ic_spotz||Free Forum||4||14th May 2009 07:47 AM|
|trying small boards||crazychemical||Windsurfing School||6||1st December 2008 11:49 PM|
|Anyone got a small Mk1 Hypersonic 34 fin||RonnieS||Free Forum||2||17th July 2008 06:32 AM|