f161 and fins - Page 2

Remi · 18th January 2007, 07:22 AM

Hi Guest,

The soft -- give your more lift in light wind, so the board just flying over the water earlier than the soft one. No problems to control it, but I change for R 13 medium rake + 8 cm over 15/20 knots, depend of the water conditions.

All the best

Remi · 18th January 2007, 07:25 AM

Hi Bubi,

The problems with Hard fins on this board, you don't get the lift easily, you push hard with nor really good results and your up wind and down wind angle is really not as good as the R19 soft-- rake + 8cm.

All the best

bubi · 22nd January 2007, 06:11 PM

hi remi,

there is significant different between deboichet r19 soft rake8+ and deboichet r19 soft-- rake8+? control, speed, lift? the board is f161!

thanks a lot for your help,
willy

Remi · 22nd January 2007, 07:37 PM

Hi Bubi,

The soft -- give your more lift in light wind, so the board just flying over the water earlier than the soft one. No problems to control it, but I change for R 13 medium rake + 8 cm over 15/20 knots, depend of the water conditions.

Guest · 23rd January 2007, 11:50 PM

Remi-
Have you tested nay Kashy fins?

bubi · 2nd February 2007, 05:14 AM

DEAR REMI

WHICH IS THE BEST FOODSTRAPS AND MASTFOOD POSITION FOR THE F 161?

BEST REGARDS

BUBI

bubi · 5th February 2007, 04:44 PM

DEAR REMI

WHICH IS THE BEST FOODSTRAPS AND MASTFOOD POSITION FOR THE F 161?

BEST REGARDS

BUBI

Remi · 6th February 2007, 11:28 PM

Hi Bubi,

For me the ebst position straps are all of them in the back and outside.
For my Code Red R2 11m, I put my mast base 1 cm behind the middle of all the track mast.

All the best

18th January 2007, 07:22 AM	#11
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,342	RE: f161 and fins Hi Guest, The soft -- give your more lift in light wind, so the board just flying over the water earlier than the soft one. No problems to control it, but I change for R 13 medium rake + 8 cm over 15/20 knots, depend of the water conditions. All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

18th January 2007, 07:25 AM	#12
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,342	RE: f161 and fins Hi Bubi, The problems with Hard fins on this board, you don't get the lift easily, you push hard with nor really good results and your up wind and down wind angle is really not as good as the R19 soft-- rake + 8cm. All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

22nd January 2007, 06:11 PM	#13
bubi Member Join Date: Nov 2006 Posts: 36	RE: f161 and fins hi remi, there is significant different between deboichet r19 soft rake8+ and deboichet r19 soft-- rake8+? control, speed, lift? the board is f161! thanks a lot for your help, willy

22nd January 2007, 07:37 PM	#14
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,342	RE: f161 and fins Hi Bubi, The soft -- give your more lift in light wind, so the board just flying over the water earlier than the soft one. No problems to control it, but I change for R 13 medium rake + 8 cm over 15/20 knots, depend of the water conditions. __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

23rd January 2007, 11:50 PM	#15
Guest Member Join Date: Dec 2006 Posts: 1,321	RE: f161 and fins Remi- Have you tested nay Kashy fins?

2nd February 2007, 05:14 AM	#16
bubi Member Join Date: Nov 2006 Posts: 36	RE: f161 and fins DEAR REMI WHICH IS THE BEST FOODSTRAPS AND MASTFOOD POSITION FOR THE F 161? BEST REGARDS BUBI

5th February 2007, 04:44 PM	#17
bubi Member Join Date: Nov 2006 Posts: 36	RE: f161 and fins DEAR REMI WHICH IS THE BEST FOODSTRAPS AND MASTFOOD POSITION FOR THE F 161? BEST REGARDS BUBI

6th February 2007, 11:28 PM	#18
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,342	RE: f161 and fins Hi Bubi, For me the ebst position straps are all of them in the back and outside. For my Code Red R2 11m, I put my mast base 1 cm behind the middle of all the track mast. All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode