Go Back   Starboard Forums > Ask Our Team

Reply
 
Thread Tools Display Modes
Old 13th June 2011, 02:39 PM   #1
Andy1234
New Member
 
Join Date: Apr 2007
Posts: 18
Default exposure to sunlight: bottom or deck (wood)

On the bottom of our Carve 131 wood (2011) there is a sticker that says: To protect the wood construction do not exposure the bottom of the board to direct sunlight.
I am slightly confused, because on the deck I see the wood construction and the bottom of the board is completly white painted. Is the statement on that sticker correct or should it be the other way round?

BTW: Great board, my girlfriend loves it!
Andy1234 is offline   Reply With Quote
Old 13th June 2011, 09:28 PM   #2
Roger
Dream Team - School Guru
 
Join Date: Aug 2006
Posts: 2,092
Default

Hi Andy,
The intent of the sticker is to let you know that excessive exposure to direct sunlight will possibly cause the thin wood layer to "yellow" (UV does this) and could cause some drying/cracking of the very thin 0.6 mm (approx. 0.024").
This does not mean you cannot take your board out on a sunny day, and sail it.
If you are at the beach all day in hot sunny conditions, it makes sense to cover your WOOD construction
board with a cloth or towel to keep the sun off it as much as possible when it's just laying on the beach.
If your Carve 131 has the white bottom, then if you must leave it in the sun, I would leave it bottom up, but there is still going to be some degradation (UV) and perhaps some yellowing over time.
If you have a board bag, (even a very light day bag), it makes sense to slide the board in when it's not in
actual use out on the water.
Hope this helps,
Roger
Roger is offline   Reply With Quote
Old 15th June 2011, 05:00 AM   #3
Andy1234
New Member
 
Join Date: Apr 2007
Posts: 18
Default

Hi Roger
Yes that helps a lot - thanks!
Andy
Andy1234 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Repairs The bottom of a wood Isonic or hypersonic? pooder Free Forum 1 14th June 2010 05:07 AM
Wood deck repair, Git-rot? skenn158 Ask Our Team 1 23rd June 2009 03:37 AM
Wood Deck Mike M Ask Our Team 4 15th June 2009 08:34 PM
Nonskid Repair on wood deck Jay Free Forum 11 9th August 2007 03:02 PM
grainy bottom surface of the freesex wood slajder Ask Our Team 8 21st February 2007 03:55 PM


All times are GMT +7. The time now is 10:35 AM.