Go Back   Starboard Forums > Free Forum

Reply
 
Thread Tools Display Modes
Old 18th June 2011, 06:13 PM   #1
Lakkabay
New Member
 
Join Date: Mar 2009
Posts: 9
Default Nose protector - how to remove

Hi. I have a Futura 144 that came with a factory fitted Starboard nose protector. I would like to remove it and just use a mast / boom protector instead. I read some threads that say these are stuck on using a silicon based sealer but this one isn't. It looks like it has been put on with a clear hard glue (possibly cyanoacrylate / super glue / instant glue - that sort of thing) but obviously I don't want to damage the board underneath. Any idea what Starboard use to put these on? Should I bother? Any advice much appreciated.
Lakkabay is offline   Reply With Quote
Old 22nd October 2014, 08:31 PM   #2
mark h
Member
 
Join Date: Aug 2006
Location: NW England,
Posts: 720
Default

I'm about get a 2014 iS107. I think ups an ex rental board and it also has a nose protector, I'm guessing it's factory fitted too. Are they fairly easy to take off?
__________________
Cheers - Mark H

The toys:
Speed W44 - Speed W49 - speed W53 - speed W58 - iS76 - iS107 - iS137 - F161.
North Warps: F2012 5.2m, 5.7m, 6.3m, 7m, 7.8m, 8.6m, 9.5m F2006 11m.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
mark h is offline   Reply With Quote
Old 23rd October 2014, 07:08 PM   #3
Unregistered
Guest
 
Posts: n/a
Default

Think they are normally stuck on with silicon...in past I have cut protector into two halves. (right at front) Be carefull to stop before you get to board... Prise it up (if you can it almost must be silicon rather than epoxy) Try to work a sharp flexible blade in..prise up and cut as you go along...its not easy..but loads easier in two halves...If no luck..(but be very careful with it) petrol will destroy the silicon..without (in theory) damaging board paint.. (certainly wont damage board..motorbike tanks used to be fibreglass)

Other interesting fact...had my windscreen replaced today...fitter punched a tiny hole through screen adhesive and inserted a long piece of dyneema/kevlar cord (about 2mm diameter) this he then pulled around screen (with a winding machine) It cut the adhesive easily..actually watched him do it whilst thinking of this problem..cord never marked body work...apparently they tried system with wire originally but they tended to damage bodywork... sure this idea could be adopted /adapted..???
  Reply With Quote
Reply

Bookmarks

Tags
None

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Nose protector Aero 127 Ilan Free Forum 3 13th October 2011 11:03 AM
Nose protector ? arild Ask Our Team 0 2nd November 2010 02:32 PM
Nose protector donaldhanson Ask Our Team 0 30th October 2010 11:08 PM
Nose protector? MRWG Ask Our Team 0 23rd October 2008 06:30 AM
Futura 122 nose protector Jeremy Free Forum 1 13th September 2008 03:31 AM


All times are GMT +7. The time now is 10:46 AM.