Go Back   Starboard Forums > Free Forum

Reply
 
Thread Tools Display Modes
Old 23rd June 2011, 02:20 AM   #1
Unregistered
Guest
 
Posts: n/a
Question Drake Footstraps seems too big!

Just bought a Futura 122 WC and went home to mount the drake footstraps, and it seems the screws are a bit oversize for the holes in the board. I'm a big guy, and don't wanna overtighten the straps, so I just figured i'd ask here before I risk damaging the insets and topcoat.^^
  Reply With Quote
Old 23rd June 2011, 09:54 AM   #2
Roger
Dream Team - School Guru
 
Join Date: Aug 2006
Posts: 2,110
Default

Good thing you asked!
Best way to install your new footstraps with the 7mm x 32 mm PT (1 mm larger dia. than what has been used in the past) is to take one of the 7mm screws; a high quality #3 Phillips screwdriver (look for a screwdriver with the black hardened tip); and a bar of common bathtub soap.
Screw the new 7mm screw int each of the footstrap insert holes you intend to use, without the footstrap,
so that the PT screw threads "tap" the plastic material in the FS insert holes. Use plenty of the soap (rubbed on the screw) as a lubricant.Screw the bare screw in for at least 1/2 it's length.
Then assemble the footstraps, with the toothed oval washer and the K9 lock plate an install your footstraps in the normal manner, again using the soap on the threads.
If you do it this way, the screws will start in the holes nice and straight, and the soap lubricant will cut the friction so the screws go in much more easily and the threads will be far more solid and last the life of the board.
Do not use any sort of power tool!
Hope this helps,
Roger
Roger is offline   Reply With Quote
Old 23rd June 2011, 03:02 PM   #3
nakaniko
Member
 
Join Date: Oct 2010
Location: Venezia, Italia
Posts: 133
Default

Being also a snowboarder I always think if it would be possible to use for windsurf boards the same M6 steel (? or brass) inserts on windsurf boards.
So no problems of too long screws (flat closed bottom) and no problems of changing strap position even 1000 times. Imho they are also more lightweight than big plastic inserts.And they are standard and easy to find everywhere

Last edited by nakaniko; 23rd June 2011 at 03:06 PM.
nakaniko is offline   Reply With Quote
Reply

Bookmarks

Tags
None

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Drake Crossover or Drake wave 26? Giuseppe Ask Our Team 3 15th April 2011 01:55 PM
Difference between DRAKE R13 RACE 520 NR S-FLEX and DRAKE R13 RACE 520 NR Unregistered Free Forum 1 26th October 2010 03:18 AM
Footstraps Unregistered Free Forum 1 4th August 2009 01:15 AM
problem with 162 stock drake footstraps SIN_0 Free Forum 1 5th February 2009 03:51 AM
Footstraps Adolfo Spanish Forum 2 7th August 2007 04:41 AM


All times are GMT +7. The time now is 07:36 AM.