|29th November 2011, 05:24 PM||#1|
Join Date: Nov 2011
2000 Formula 155 Footstrap Screws
What type of foot strap screws are used on the 2000 Formula 155?
(I would post a link to the 2000 website, but this is my first post and the site requires 5 posts before including links.)
I need to replace them: the phillips heads are worn.
Board still going strong!
|29th November 2011, 07:06 PM||#2|
Dream Team - School Guru
Join Date: Aug 2006
The 2000 F-155 used pretty standard 6mm x 1.0mm x 28 mm PT (Plastics Technology) footstrap
Most windsurf shops should still carry some of them.
If you cannot find them. let us know here and we may be able to come up with a set of them.
There are 2 reasons the Phillips heads could be worn.
#1 Some one used a power tool (probably with the wrong size bit) to install them originally.
#2 Someone used a damaged, or the wrong size Phillips screwdriver to tighten them.
It takes a #3 Phillips high quality heat treated tip screwdriver.
Any other tool just tears up the Phillips recess and geometry and makes a mess of the
Last edited by Roger; 29th November 2011 at 07:10 PM.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Footstrap screws||axel.gern||Ask Our Team||11||8th April 2010 07:45 PM|
|Footstrap screws - bent?||RadiantX||Ask Our Team||9||18th December 2009 09:33 AM|
|Kode 2009 Footstrap screws||Mak209||Free Forum||1||9th September 2009 08:53 PM|
|Footstrap plugs for screws.||Unregistered||Free Forum||0||8th July 2008 01:23 AM|
|broken footstrap screws||Guest||Free Forum||3||17th January 2007 11:37 AM|