Go Back   Starboard Forums > Ask Our Team

Thread Tools Display Modes
Old 28th March 2007, 03:18 AM   #1
Join Date: Aug 2006
Posts: 44
Default q for ian fox difrence drake fins pro and sr6b

Hi ian,

i cant deside wether to by the drake pro or the sr6.

I have the feeling that the pro is softer and the board wants to fly sooner. Do i need the stiffer sr6? Or should i use smaller drake pro's
Witch fin is better in light wind and witch in hard wind?

I have the isonic 135 and 105, i way 90 kg and sail in chop/swell.
sail warp 2007 9.9/7.8/6.8/5.8


erik is offline   Reply With Quote
Old 30th March 2007, 01:38 AM   #2
Ian Fox
Join Date: Aug 2006
Posts: 533
Default RE: q for ian fox difrence drake fins pro and sr6b

Hi Erik,

The DrakePro is softer and in general a more versatile fin offering a wider all round performance range. In general, heavier guys who sail with hi fin loads will find the DrakePro(in slalom sizes) becoming a bit soft earlier than average weight riders, especially when pushed hard in chop/swell. However in light winds the Drake Pro still has some advantages (ease of sailing, speed at various angles) even for the heavy,hard guys.

SR6b is a stiffer fin, it does perform better under higher loads (heavier/harder sailing guys) and it does have a marginal top end advantage over DrakePro in mid to hi speed conditions, but does not have quite the same bottom end, upwind or verstaility as the DrakePro. Many riders also find the DrakePro resumes easier after a jibe, SR6 is a bit more technical.

In your case, if you're loading the fin a lot and looking more for top end speed than angle/versatility/recovery then a good combo could be Drake Pro in lighter 9.9 / lightwind 7.8 and SR6 in powered 6.8/5.8 conditions.

Also worth noting we continually evolve the fin layups for the slalom boards to fine tune and refine the best "allround" performance for typical sailors ; this means the stock fins are slightly different for year to year as they are focussed and refined for versatility more than "peak" performance in any one criteria(which would compromise the allround character..)

Please let us know if you have more questions .

Cheers ~ Ian

Ian Fox is offline   Reply With Quote
Old 30th March 2007, 01:07 PM   #3
Join Date: Aug 2006
Posts: 26
Default RE: q for ian fox difrence drake fins pro and sr6b

From what you´re describing Ian, I can´t figure out why you supplied a 34 drake pro and a 42 Sr6b for the 2006 Isonic 115. Seems it should have the other way around?
Doby is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +7. The time now is 09:07 PM.