5th April 2007, 11:33 AM
|
#1 |
|
Member
Join Date: Apr 2007
Posts: 47
|
Does Starboard use CAD for Design & Shaping
Does Starboard use a CAD system for the design of their boards with automated shaping based on the CAD design.
|
|
|
|
6th April 2007, 11:56 AM
|
#2 |
|
Member
Join Date: Apr 2007
Posts: 47
|
RE: Does Starboard use CAD for Design & Shaping
Hmm .... does anyone from the public know the answer?
|
|
|
|
|
6th April 2007, 02:06 PM
|
#3 |
|
Member
Join Date: Aug 2006
Posts: 327
|
RE: Does Starboard use CAD for Design & Shaping
My guess is no.
First, because if they did, they would tell. Second, because of some slight shaping oddities and incongruences that can I notice throughout the range. This, if I am right, makes evident that CAD/CAM are not mandatory to make great boards. |
|
|
|
|
8th April 2007, 07:30 AM
|
#4 |
|
Member
Join Date: Apr 2007
Posts: 47
|
RE: Does Starboard use CAD for Design & Shaping
I think you must be right geo.
What about the design and shaping of starboard's fins .. is this at least done by a CAD program? JP promote the use of CAD for their fins which presumably means they dont use CAD for their boards because they don't promote it. Being an engineer, I guess I like the analytical fundamentals supporting the use of CAD designs & CAM shaping. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
