sl2 for i-sonic 133 / RS 9.0

[poulou]

Hey,

I'm looking for the best overall performance for this gear (I weigh 73kgs).

I love the SL2 and I was thinking about the SL2 46 deep tuttle.

Can anyone give me a feedback or an opinion?

And also, what about the 48 drake fin? Should I keep it?

Thanks much

[raf]

i have use this fin's of the is133 07 , it's works perfect on this board
Raf

[Sieger]

The 48 Drake fin only works in flat water. Here you can easy ride on the fin and point high. When sailing on smal waves The drake fin has a little to many rake and presure the nose of the board down on every wave and lower your speed. In this situation it is better to use fins with less rake. SL2 46 and 48has a little less rake than the Drake and will perform better. The board and nose are higher positioned on the water on small and bigger waves and flyes better, more easy over these shop without the feeling it stiks on every wave. I use the Isonic with RSracing 9.0 also use fins 54 and 51 in real flat water. With more chop and more wind (9.0) I use the SL2 46-48. With 7.8 I use 42-44 cm. Hope this will help.

Regards Sieger

[sylvain_poulou]

Thanks,

I meant the 2007 i-sonic.

I'll buy sl2 48 for 9.0 RS
and sl2 44 for 9.0 and 7.8 when the wind is >15kts