Powerex mast

honk · 3rd December 2007, 10:58 AM

Hi anyone tried the new powerex mast from China. Are they reliable. How would you best describe the bent curve. and is closest to which make ? I am thinking of using for my Severne overdrive 8.5. and the Gator 7.0.

Thanks for advice.

mike · 3rd December 2007, 08:40 PM

I've had the Powerex Z free 490 for the past year. Used with a 8.0 Sailworks Retro. No problems, good performance. I was told that this mast is the same as the Sailworks joystick.

honk · 6th December 2007, 10:26 AM

Thanks Mike for the reply. Yes the joystick and Powerex the same.
Anyone has experience of the mast with Severne sails ?

wsurfn · 12th December 2007, 08:41 AM

I use the 460 z-free in my Gator. Bend is good for Severne. I use the 430 RDM in Severne Blades. Same.

10th March 2011, 12:59 PM

Hi mike & honk,
Can you let me know who is the guy to contact in china?
interested to buy one.

my contact:
info@oxbold.com
Thanks!

3rd December 2007, 10:58 AM	#1
honk Member Join Date: Aug 2006 Posts: 28	Powerex mast Hi anyone tried the new powerex mast from China. Are they reliable. How would you best describe the bent curve. and is closest to which make ? I am thinking of using for my Severne overdrive 8.5. and the Gator 7.0. Thanks for advice.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

3rd December 2007, 08:40 PM	#2
mike Member Join Date: Sep 2006 Posts: 66	I've had the Powerex Z free 490 for the past year. Used with a 8.0 Sailworks Retro. No problems, good performance. I was told that this mast is the same as the Sailworks joystick.

6th December 2007, 10:26 AM	#3
honk Member Join Date: Aug 2006 Posts: 28	Thanks Mike for the reply. Yes the joystick and Powerex the same. Anyone has experience of the mast with Severne sails ?

12th December 2007, 08:41 AM	#4
wsurfn Member Join Date: Sep 2006 Posts: 32	I use the 460 z-free in my Gator. Bend is good for Severne. I use the 430 RDM in Severne Blades. Same.

10th March 2011, 12:59 PM	#5
wilson Guest Posts: n/a	Hi mike & honk, Can you let me know who is the guy to contact in china? interested to buy one. my contact: info@oxbold.com Thanks!