Old 5th April 2008, 01:29 PM   #1
nifty
Member
 
Join Date: Aug 2006
Posts: 28
Default Isonic 133 fin

Hi team, what would be the optimum sized SL2 for the Isonic 133 (2008) with 9m RS Racing? Upwind is important, but also off the wind needs to be slippery still. Thanks.
nifty is offline   Reply With Quote
Old 7th April 2008, 06:03 AM   #2
Remi
STARBOARD DEVELOPMENT
 
Join Date: Aug 2006
Location: Thailand
Posts: 2,418
Default

Hi Nifty,

Depends of the condition, but I am using the SL2 48cm and the R16 52cm. Both are excellent but the R16 need more feeling and glide very well.

All the best
Remi is offline   Reply With Quote
Old 7th April 2008, 04:54 PM   #3
nifty
Member
 
Join Date: Aug 2006
Posts: 28
Default

Great, thanks Remi. I was guessing 48 -50cm. Is the supplied 52cm fin, (the one that comes with the 133), too much for the 9m? or is it usable maybe when very marginal? Thanks.
nifty.
nifty is offline   Reply With Quote
Old 9th April 2008, 03:28 AM   #4
christophe
New Member
 
Join Date: Oct 2006
Posts: 19
Default

hi Nifty,
the supplied 52cm fin is not very good (see French forum)
it gives me many spin out with 9.0
christophe is offline   Reply With Quote
Old 9th April 2008, 03:20 PM   #5
nifty
Member
 
Join Date: Aug 2006
Posts: 28
Default

Thanks for your feedback Christophe, which fin is your preference for the 9m?
nifty is offline   Reply With Quote
Old 10th April 2008, 02:01 AM   #6
christophe
New Member
 
Join Date: Oct 2006
Posts: 19
Default

I have used this board just a few times
this board replace my previous formula so I have only long fins

I think between 50 and 55 cm in quality superior it would be a good choice for 9.0

As I would like to use a 10m˛, I have tried a deboichet R13 65cm : it works very well with wind < 15 Knots and flat water but it would be more difficult with choppy water
christophe is offline   Reply With Quote
Old 10th April 2008, 03:13 AM   #7
nifty
Member
 
Join Date: Aug 2006
Posts: 28
Default

Ok, thanks for that, just be carefull not to use too much fin on the Isonics as I learned with my Is122 - they don't like too much fin, and also a bit fussy with the rake - she like the rake of the supplied Drake fin or close to that, but not raked too much forward. Anybody feel free to correct me if I am wrong. Thanks.
Nifty.
nifty is offline   Reply With Quote
Old 10th April 2008, 07:37 AM   #8
Jean-Marc
TEAM
 
Join Date: Aug 2006
Posts: 1,271
Default

Nifty,

I also agree it's not very usefull to overfin iS122 or iS133, Rémi is spot on with his fin suggestions for a 9.0 m2 sail.

I've tried a 11.0 m2 sail on iS133W85 with a Select RS7 55 cm fin and this is just fine for both low and high end, absolutely no need to get a larger fin than that. The same setup on iS122W75 is way too much with crystal clear diminishing returns. So, I feel a 65 cm fin + 9.0 sail + iS133W85 combo is a bit odd to say the least.

Cheers !

JM
Jean-Marc is offline   Reply With Quote
Old 10th April 2008, 07:41 AM   #9
CarlosD
Member
 
Join Date: Feb 2007
Location: Buenos Aires Argentina
Posts: 33
Send a message via MSN to CarlosD
Default

Hi Nifty,

I use to sail my IS 133 with a Code Red 9.0 (2006).
For mi weight (89 KG) the Drake 52 suppied with the board works perfectly between 10-15 knots, the board glides high with a slightly "Formula feeling" but much more responsive and impressive speed.
Recently I purchased a new Deboichet SL2 46 that I tried last weekend, between 12-18 knots the IS 133 is now a "pure" Slalom board (while maintaining good pointing ability) with lots of speed and control.
CarlosD is offline   Reply With Quote
Old 10th April 2008, 01:19 PM   #10
nifty
Member
 
Join Date: Aug 2006
Posts: 28
Default

Great! Thanks a lot guys - that info has been really valuable.
Cheers,
Nifty.
nifty is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +7. The time now is 10:39 PM.