fin star-board go

mau888 · 13th August 2009, 05:50 AM

i hava a star-boars go with a turtle box but can i put a usbox fin ore a powerbox fin on my board ???

Roger · 13th August 2009, 11:36 AM

Hi mau888,
Unfortunately, without some sort of Tuttle (sorry, not "turtle") adapter (adapts a "A"/"E"
slot fin to a std. depth Tuttle fin box) there is no way you can use an "A"/"E"/"US" slot type fin in your board.
Power box will not fit at all unless you grind/mill off the Powerbox tapers and put a std. Tuttle adapter on it.
You can use either a std. Tuttle or a deep Tuttle fin root in your GO board.
Hope this helps,

mau888 · 13th August 2009, 08:47 PM

oke thankyou this helps me

13th August 2009, 05:50 AM	#1
mau888 New Member Join Date: Aug 2009 Posts: 6	fin star-board go i hava a star-boars go with a turtle box but can i put a usbox fin ore a powerbox fin on my board ???

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

13th August 2009, 11:36 AM	#2
Roger Dream Team - School Guru Join Date: Aug 2006 Posts: 2,060	Hi mau888, Unfortunately, without some sort of Tuttle (sorry, not "turtle") adapter (adapts a "A"/"E" slot fin to a std. depth Tuttle fin box) there is no way you can use an "A"/"E"/"US" slot type fin in your board. Power box will not fit at all unless you grind/mill off the Powerbox tapers and put a std. Tuttle adapter on it. You can use either a std. Tuttle or a deep Tuttle fin root in your GO board. Hope this helps,

13th August 2009, 08:47 PM	#3
mau888 New Member Join Date: Aug 2009 Posts: 6	oke thankyou this helps me