Go Back   Starboard Forums > Ask Our Team

Thread Tools Display Modes
Old 20th January 2010, 08:32 AM   #1
Z a c
New Member
Join Date: Jan 2010
Posts: 7
Default US fin box

I have just bought an 86 Kode excellent board. Although this is the fist board i have used with a US fin box. At the moment i am using the stock fin, the screw is not flush with the bottom of the board and I think this would effect some performance. I have taken the washer out and it is a little better but not perfect. The screw has a domed head should i find one with a flat head? its an ex demo board so mightnt be orignal screw. Or does it not matter?
Thanks, from Zac
Z a c is offline   Reply With Quote
Old 24th January 2010, 01:58 AM   #2
New Member
Join Date: Jun 2009
Posts: 17


As a matter of practice, I always recess the screw head by drilling into the fins. This clears the flow at the base of the fin and reduces the occurance of catching weeds.

Chesapeake is offline   Reply With Quote
Old 24th January 2010, 04:48 AM   #3
Join Date: Aug 2006
Posts: 1,191

In most cases, it's no big deal. If you take away the washer, be sure to check so that the screw don't bottom in the box. If you're worried about the big head of the ph2 original screw you can get one with a smaller head, but again, be sure that it is short enough to not bottom in the finbox.
Ola_H is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +7. The time now is 12:54 PM.